Vintage Guitar and Bass forum

interesting EB3L

jules

  • *****
  • 3068
    • View Profile
interesting EB3L
« on: September 26, 2007, 02:22:12 PM »
Hi all, check this EB3L on ebay

Its in Italy, and i'm going to go for it.

But what about these features - the non-black headstock is common in the SB series, but how often does it come up in EBs? And what about the covered neck heel? Again common on a Les Paul Signature bass, but on an EB3?

Has anyone seen either of these features on an EB before? please tell all!

interesting EB3L
« Reply #1 on: September 26, 2007, 07:59:07 PM »
Hi Jules, certainly a rare find there. Definately some interesting features which would appear to be original. :lol:

G

www.motherlodeonline.co.uk

interesting EB3L
« Reply #2 on: September 26, 2007, 09:05:30 PM »
Considering the tuners and 3 pc Maple neck its definately 74 or later.  I'd speculate that it's closer to end of run (79) and they just ran out of EB necks so they used a LP Sig neck instead (both long scale and maple) and had to remove the veneer for that reason.

EB-3
« Reply #3 on: September 26, 2007, 09:35:21 PM »
That is definitely an EB-3 from the last couple of years, not 1973.
Huh?

jules

  • *****
  • 3068
    • View Profile
what year
« Reply #4 on: September 27, 2007, 01:23:30 PM »
Quote from: Granny Gremlin
Considering the tuners and 3 pc Maple neck its definately 74 or later.  I'd speculate that it's closer to end of run (79) and they just ran out of EB necks so they used a LP Sig neck instead (both long scale and maple) and had to remove the veneer for that reason.


I completely agree this is a Les Paul sig neck - that explains the headstock veneer situation nicely

but sorry guys, have to disagree with the date

The 3 piece maple necks came in straght after the split headstocks finished. OK there may have been a few transition models, but the maple neck was an integral part of the new-design EBs. As were those tuners. See the 1972 bass catalogue to confirm this, or check my '72 EB3 which has both features yet an older bridge

Obviously the 3 pt bridge says mid '73 onwards, but the serial number is an old 6 digit one, and the pot codes seem to be 35th week of '73

eb2

  • ****
  • 456
    • View Profile
interesting EB3L
« Reply #5 on: September 29, 2007, 02:54:04 AM »
What is with the black around the 3 point bridge?  Is it some gasket type of thing?  I am unfamillar enough with 70s EBs, but this one is different.  The neck is key to the odd.  The un-canned choke is typical of the later stuff as well, no?  I would offer that 74 or even later is not an impossibility as I have my pet theory that Gibson had an irregular habit of putting together stuff with forgotten or half finished parts and letting them out without really keeping track, sometimes years after parts had been finished.

I think most people have seen the well documented Explorers that leaked out in the early 60s with 58 bodies.  There are the transition Firebirds.  I have seen a couple of EB2s that had older bodies with 65 era chrome parts. I think most of us have found a few that didn't play by the rules, but some that seemed to be a real mish-mosh of eras.  I suspect that if that one got assembled and then maybe dropped or dinged, they may have thrown it in a pile.  Then an odd neck was hanging around, and who knows why?  They made a whole one out of it and sent it out.
boom

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!