Vintage Guitar and Bass forum

New Old Stock Gibson parts

jules

  • *****
  • 3068
    • View Profile
New Old Stock Gibson parts
« on: September 19, 2007, 02:05:02 PM »
This doesn't happen so often these days....

If you don't know already someone has a lot of NOS Gibson parts on ebay

Check his stuff here -

50 unplated bridge covers $14.99 each (if someone buys them all and plates them, they will make a killing!)
RD scratchplates
RD pickups
Ripper Scratchplate

and more to be listed!

New Old Stock Gibson parts
« Reply #1 on: September 19, 2007, 03:33:09 PM »
Cool, thanks Jules.

mrbass

  • ***
  • 124
    • View Profile
parts
« Reply #2 on: September 19, 2007, 05:38:46 PM »
Those bridge covers are very cheap, I've seen them go around $100, in not mint condition

Ricky

New Old Stock Gibson parts
« Reply #3 on: September 19, 2007, 07:10:34 PM »
I scored an 80s Grabber neck for... wait for it... $90 shipped to the UK!
It's unfinished, truss rod installed. Just need to get a fingerboard. I'm thinking of putting on an ebony board and making my G3 fretless...

However my G3 neck is pretty messed up, but I don't think I can afford to get a fretted board done. :?

New Old Stock Gibson parts
« Reply #4 on: September 19, 2007, 07:38:05 PM »
can you imagine going through the warehouse stuff. It would be like a dinosaur dig!

eb2

  • ****
  • 456
    • View Profile
New Old Stock Gibson parts
« Reply #5 on: September 19, 2007, 08:10:35 PM »
I got one of his EB3 chicken head knobs.  It is probably no different from Allparts stuff, but for two bucks you get a Kalamazoo part.  Not bad at all I think for a vintage part.  I am thinking of grabbing one of the bridge covers that never got chromed.  I probably would never stick it on the EB3, but it is cheap enough and a nice thing to have, even if I would have to get some hot rod place to chrome plate it.
boom

jules

  • *****
  • 3068
    • View Profile
Kalamazoo sale
« Reply #6 on: September 19, 2007, 08:14:05 PM »
Quote from: Redbird
can you imagine going through the warehouse stuff. It would be like a dinosaur dig!


yeah I know!

I've seen bits listed as NOS from the Kalamazoo factory for as long as i've known about ebay, but definately a lot less nowadays, an never in the quantities up now.

What happened? Did they have a massive "come and buy anything" sale when the factory closed? Or did staff, now out of a job take it?

Did anyone go to the factory when it closed? Tell us a story!

New Old Stock Gibson parts
« Reply #7 on: September 19, 2007, 10:03:05 PM »
I have only been to Kalamazoo once, but that was to see The Kalamazoo  Air Zoo, which has restored WWII fighters that some were rebuilt from just a tail section.

http://www.airzoo.org/aircraft/collection1/

eb2

  • ****
  • 456
    • View Profile
New Old Stock Gibson parts
« Reply #8 on: September 20, 2007, 08:46:30 PM »
What happened? Did they have a massive "come and buy anything" sale when the factory closed? Or did staff, now out of a job take it?
Did anyone go to the factory when it closed? Tell us a story!


I was just wondering that on a post at the dudepit.  Heritage is still in the main factory there, no?  This is really a fascinating treasure trove that someone has been sitting on for twenty years or so.  The fact that it is from an odd range of instruments but with some 70s and 80s things makes me suspect that either an ex-Gibson storage building got sold or someone bought some crates of stuff that got left somewhere at an auction.  So I am thinking that when they moved to Nashville, this stuff got packed up and dumped somewhere, and got forgotton or abandoned.

On the plus side I have been able to ebay score a NOS chicken knob and a NOS varitone plate for my EB3 within a week.  Very good for Gibson bass fans.
boom

New Old Stock Gibson parts
« Reply #9 on: September 20, 2007, 09:25:45 PM »
And at great prices.

also just a note, a chroming place here will not do a batch for under $30.

New Old Stock Gibson parts
« Reply #10 on: September 21, 2007, 03:12:31 PM »
I emailed they and asked how he came across the parts and here was his reply-

Quote
John, these are parts that were found in storage by some friends of our family and we just have the priviledge and honor of offering these to the public. No real story, just the benefit of being in the Kalamazoo area.
 
   
   - greatdealz1967

New Old Stock Gibson parts
« Reply #11 on: September 24, 2007, 02:46:24 PM »
Bought my RD pickguard on the 11th. payed him on the spot, after I clicked BIN, has he not left any feed back and now it's more than a week and I8 still have not received my part.

I contacted him
He said he shipped in snail mail on Sept 12th, but from Michigan to Chicago should not have been at the very most a week, really only a few days.

Will keep you posted.

New Old Stock Gibson parts
« Reply #12 on: September 24, 2007, 05:26:35 PM »
He said he would send me another one- that alone boggles the mind- quanties of unused GIbson surplus!

Oh I'll just send another- wow!

I aked him about RD PUPS & boards. He said he has a lot to go through and thought he had RD boards, but needs to go through bit by bit.

New Old Stock Gibson parts
« Reply #13 on: September 24, 2007, 06:42:26 PM »
He's been on my favoraite sellers list for about a month now. If he does have RD Artist boards then I'll def be getting one.

So far I got the RD Standard guard and pups and some Triumph switches (phase and hi/lo - not sure if the lever switch he has listed, as a Nighthawk switch, will work for the tone selector).

New Old Stock Gibson parts
« Reply #14 on: September 25, 2007, 01:18:15 AM »
Yeah, i ordered one of the bridge covers for my ripper, hope he'll get some ripper pups.  He's got pretty good prices.

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!