Vintage Guitar and Bass forum

replica handrests for EB2, EB3


replica handrests for EB2, EB3
« Reply #1 on: July 24, 2007, 02:52:49 AM »
looks cool but $85 bucks is kinda steep for a piece of bent steel.for an original,sure.but not for a reproduction.you could make one yourself.
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

eb2

  • ****
  • 456
    • View Profile
replica handrests for EB2, EB3
« Reply #2 on: July 25, 2007, 12:00:36 AM »
Well, at least they are trying.  The price is a little steep.  Maybe they can make some to cover the bridges on late 60s EBs.
boom

jules

  • *****
  • 3068
    • View Profile
handrests
« Reply #3 on: July 25, 2007, 12:57:08 PM »
If they were nickel plated, i'd have a couple. I even considered buying them to get plated, but I guess with buying, posting, tax and plating they could get expensive.

Mind you nickel ones just never seem to come up

Bails

Re: replica handrests for EB2, EB3
« Reply #4 on: March 31, 2009, 04:39:05 AM »
I know this is an old post, but a few years ago I got one of these made out of mild steel at a local metal fabrication shop. It cost me a six pack of beer, and took the guy about 15 minutes. I then chromed it at another shop for free - The guy was doing a batch of chrome and just added it the paying customer's pile.
Two wrongs don\'t make a right, but three rights do make a left.

Re: replica handrests for EB2, EB3
« Reply #5 on: April 01, 2009, 07:29:30 PM »
Buyer beware!  I've found some unit to unit variations here, with the screw holes and the side tabs also.  Had to send two back to the manufacturer, so I gave up.  My original is somewhere hiding here; just gotta look for it.  Playing is easier without it anyway, I think.
Repros are almost NEVER as good as the originals

jules

  • *****
  • 3068
    • View Profile
Re: replica handrests for EB2, EB3
« Reply #6 on: April 02, 2009, 02:00:14 PM »
I generally don't use them either. I just recently bought a batch of single screw hole rosewood thumbrests - I don't want to add holes to my basses, but one of these where the old handrest used to go greatly increases the playability of old EBs/Newports - and completely reversible

ezra1

  • ***
  • 109
    • View Profile
Re: replica handrests for EB2, EB3
« Reply #7 on: April 02, 2009, 02:31:02 PM »
I  have somewhat related story.I had a reissue U.S. P-bass that I got used that was missing the chrome pup cover/handrest.So I ordered the "offical" Fender part.Should be a slam dunk deal ,right ? WRONG .  The center hole spacing was about a 1/4" off on the new part as opposed to the holes in the bass,and you could tell that the part had been on the instrument at one time.So......I called and complained.Finally I got a real live person on the phone who went and measured the spacing on another bass.It matched mine....then he went and measured several of the replacement parts and they ALL matched my replacement part.I was offered a refund...Well I started making some phone calls and finally a guy at RS Guitar Works told me that this was common.He told me to get a small piece of a 2 x 4, lay out the correct center to center holes..screw down one side firmly and force the other side as close to the correct spot and screw it down as close as I could. Leave it like that for a day or so...and repeat this untill it reached the correct spot.(I was not able to "man-up " and force it.(Even if I could have done so,it would have probably stripped and pulled the screw holding that side down out .)It took about 3 days. It slowly got the contour right and the correct center hole spacing.  Now it looks right.    Anyway,you would think that these big companies could do a better job on this stuff for what they charge us for and sell to the public.

Bails

replica handrests for EB2, EB3
« Reply #8 on: October 21, 2009, 11:01:48 PM »
Old post I know...
What are the original hand rests made from?
I had a replica bridge cover made out of mild steel, and then had it chromed, but was wondering if that's what the originals are made of.

The replicas mentioned in this thread (and sold on eBay) are made from stainless steel, though I think it's unlikely the orginals were made from that. Plated brass maybe?
Two wrongs don\'t make a right, but three rights do make a left.

jules

  • *****
  • 3068
    • View Profile
bridge and pickup covers
« Reply #9 on: October 22, 2009, 01:09:08 AM »
Quote from: Bails;12135
Plated brass maybe?

 
yeah that's right. First nickel plated, and then phasing in from '65 they went to chrome.
 
The greatdealz people had some unplated bridge covers - just the brass, for people to plate themselves. Not sure if they've still got them, there are none listed now.
 
The steel replicas are pretty accurate by the looks of them, and good condition originals can get pricey.

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!