Vintage Guitar and Bass forum

banana ripper - dont laugh


doom

  • ****
  • 264
    • View Profile
banana ripper - dont laugh
« Reply #1 on: April 08, 2007, 11:00:50 PM »
I'm not laughing.....

Seriously, if someone is after an ebony board fretted Ripper this might be a deal

banana ripper - dont laugh
« Reply #2 on: April 09, 2007, 08:59:25 PM »
This is almost as bad as my 4001 Ric that I cut and painted bright orange.
This one actually looks better.   God that yellow sucks and screams "my music sucks" too.  Sorry.  Hardly looks like it's going to be a RIPper.  Buy that thing, dismantle it and soak it in paint stripper!!!

jules

  • *****
  • 3068
    • View Profile
paintjobs
« Reply #3 on: April 11, 2007, 02:44:05 PM »
you never know - the paint might come right off. When we were children, my brother painted his first bass with an aerosol - car paint I think. It actually came of with a rub with a non-scratch dishwashing sponge. Took about 20 mins to do.

I suspect this may be the same. The buyer takes a risk - but that should keep the price down

This could turn out to be a real bargain for someone willing to take a risk. Of course - it needs a new pickguard, another pickup and associated wiring. If the paint doesn't come of, its still worth the cost of parts/case... so far anyway

eb2

  • ****
  • 456
    • View Profile
banana ripper - dont laugh
« Reply #4 on: April 11, 2007, 05:09:54 PM »
I agree - whacko paint jobs are sometimes surprisingly easy to get off.  Every once in a while the local junk place will get in a guitar or bass that was painted with latex house paint, and while horrible looking, they sometimes have a mostly intact original paint job hibernating below.  Get yourself some old t-shirts and buffing compound and you could be in business.

I actually like the approach - day-glo yellow, one pup, one knob.  Kind of a bass-psychotic's take on Eddie Van Halen.  Rippers and Grabbers are a fine platform for messing around with - the goober's Fender.
boom

Paint removing
« Reply #5 on: April 11, 2007, 06:39:15 PM »
Sometimes you can remove spray paint just using masking tape. Lay it on the body and pull off

banana ripper - dont laugh
« Reply #6 on: April 13, 2007, 06:58:21 PM »
You know what: I kind of like this. As is. Very industrial. Less is more. I even like the worn off parts. This thing has tons of vibe. My only concern would be ...


(looking around if Dave W is anywhere near  :roll: and then in a very hushed voice:)

Errrm, might that kind of garage finish deaden the sound?  :shock:

There, I said it.  :(  Swoop down on me mighty Dave and dismember me ...

Uwe

Dave W

  • ****
  • 433
    • View Profile
banana ripper - dont laugh
« Reply #7 on: April 14, 2007, 01:56:50 AM »
Yeah, I can just hear those long-dead wood cells gasping, trying to "breathe" through the finish. :lol:

banana ripper - dont laugh
« Reply #8 on: April 14, 2007, 02:54:42 AM »
why is it going for so much loot?i kinda like the one rear pick up look,,just not yellow.eeeewwww..
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

Devo
« Reply #9 on: April 14, 2007, 12:48:11 PM »
Has a Devo vibe to it

banana ripper - dont laugh
« Reply #10 on: April 14, 2007, 04:00:33 PM »
It can bring home the bacon,but everyone would know...
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

banana ripper - dont laugh
« Reply #11 on: April 15, 2007, 06:25:31 AM »
Aw man, it went for $415! That ain't much more than I'm shelling out for an Epi Ripper reissue. Dangit. Wish I'd seen this sooner, but I couldn't have afforded it anyway. Now, a month or two from now, it woulda been perfect timing.

Redbird's right-- serious DEVO vibe. And I loves me the DEVO.

(I still woulda taken that paint off though.)

The one pup is a bummer, and these days I prefer maple fingerboards, but still....

 :cry:

banana ripper - dont laugh
« Reply #12 on: June 19, 2007, 10:21:14 PM »
well, here's the banana ripper now



I used a lot of time and sandpaper to get that scum off the body but now it looks good enough. I tried to restore it to look as much original as possible, the hardest part was the headstock. I didn't want to destroy the Gibson logo or the serial number. The colour is little bit too "oaky" but it comes close. That hand-made pickguard will do for the time being. I'll get new one when I found another pickup somewhere. It still needs some electric work, so tomorrow I'm taking Ripper to see local luthier who will bring her back alive.
Fender Jazz Bass, Gibson Ripper, Gibson Melody Maker D \'65, Ibanez Musician, Yamaha SF1200, Daion Savage, Tokai Strat, Epiphone Thunderbird.

banana ripper - dont laugh
« Reply #13 on: June 20, 2007, 02:46:15 AM »
BIG IMPROVEMENT,was it originally black?with that ebony board,you should refin her in cherry sunburst.i was considering buying it when it was on the 'bay
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

banana ripper - dont laugh
« Reply #14 on: June 20, 2007, 02:48:36 AM »
she was a mongoloid a mongoloid,but not anymore
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!