Vintage Guitar and Bass forum

pickup recomendations for a gibson ripper

pickup recomendations for a gibson ripper
« on: February 05, 2007, 06:40:48 PM »
I've got a 76 ripper project, curious what you guys recommend for pickups, im thinking of seymour duncan p/j quarter pound pickups, I'll have to route out some of the wood then but thats okay, just curious of your guys opinions or what other people have done.  Im also thinking of emg pickups.[/img]

doom

  • ****
  • 264
    • View Profile
pickup recomendations for a gibson ripper
« Reply #1 on: February 05, 2007, 09:29:20 PM »
If you want as close to original as possible without hanging onto Ebay then Seymor Duncan makes replacement pickups. The fifth pickup under "Other pickups":http://www.seymourduncan.com/products/customshop.shtml

jules

  • *****
  • 3068
    • View Profile
ripper project
« Reply #2 on: February 05, 2007, 09:31:06 PM »
I've got a (half done) ripper project which will hold 2 EB humbuckers, a bit like this prototype. I have a pair of modern day tbird pickups that I could use instead, but I will certainly miss the glint of chrome. Both will require a new scratchplate so I can't test them until I get it made.




pickup recomendations for a gibson ripper
« Reply #4 on: February 06, 2007, 03:09:49 AM »
hi,i've also got a 76 Ripper,someone put EMG's in it and changed the rotary to a toggle.i'm not crazy about the EMG's I cant seem to find any good pick ups new,so i've been thinking about putting in some T40 pickups.
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

pickup recomendations for a gibson ripper
« Reply #5 on: February 06, 2007, 03:11:42 AM »
check out that dude's 'stach,it could play bass by itself
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

pickup recomendations for a gibson ripper
« Reply #6 on: February 06, 2007, 05:18:40 PM »
So do your emgs fit in the origianl pickguards cut outs? Or our they cutout more?  Does it have a battery compartment in the back, or do you have to rip everything apart when your batteries go dead?

santi

  • ***
  • 133
    • View Profile
pickup recomendations for a gibson ripper
« Reply #7 on: February 06, 2007, 09:40:42 PM »
Schaller is other good option.

Schaller Bassbucker  http://www.schaller-guitarparts.de/1345.htm

 The coil cover could be black. Many combinations of coils are available. I like the "Golden 50", the normal humbucker configuration. The bassbucker sounds really good.

pickup recomendations for a gibson ripper
« Reply #8 on: February 07, 2007, 03:45:01 AM »
my EMG's are passive so no battery.they are the same size as guitar humbuckers and mount on standard guitar pick up rings,they sound very bright! too bright .i'm gonna change 'em.
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

pickup recomendations for a gibson ripper
« Reply #9 on: February 07, 2007, 03:55:20 AM »
hey,jules that bass is way cool,how come they never made them like that.gibson should reissue that bass..how are you making that? are you building a new body or filling in an old one?and how many early rippers were cherry burst w/ ebony boards like mark evans' from ac!dc?
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

pickup recomendations for a gibson ripper
« Reply #10 on: February 07, 2007, 04:03:12 AM »
that schaller pup looks good.how does it sound?
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

jules

  • *****
  • 3068
    • View Profile
ripper
« Reply #11 on: February 07, 2007, 01:50:11 PM »
Quote from: reaper attack
hey,jules that bass is way cool,how come they never made them like that.gibson should reissue that bass..how are you making that? are you building a new body or filling in an old one?and how many early rippers were cherry burst w/ ebony boards like mark evans' from ac!dc?


Well the new ripper pickups came out, and being plastic, they were cheaper. At the time Gibson (and all American guitar companies) were struggling to be competitive - so they adopted cheaper construction methods. The Ripper/Grabber/G3 are all routed on one side only, with the electrics assembled seperately on to the pickguard - this was cheaper to manufacture than the both-side routed, electrics-on-the-wood approach. They still did the more expensive instruments that way......


I've got an old ripper which has been hacked a bit - mine will not be identical though - the one shown is the early style body - mine is a later one. I assume that is maple - mine is alder. There is one small rout that will need filling, and I may or may not do that. the rickenbacker-style guard does look good on it, but I might go for a slightly larger one to cover that route. Still not decided - but mine will have two chrome humbuckers, although if I could get a new SG bass pickup, I would like to try that in the bridge position. I have done some tests, and the bridge mudbucker is not as distinct a sound as perhaps I would like, but with both pickups together it did sound pretty awesome

This project is hopefully one i'll get done this year (amongst my many others!)

santi

  • ***
  • 133
    • View Profile
pickup recomendations for a gibson ripper
« Reply #12 on: February 07, 2007, 08:40:44 PM »
Well Reaper, the Schaller PUP sounds very well, loud. In my Epi Ripper I installed the bassbucher PUP in bridge position and runs very well, it offers warm jazz sounds or rock. These PUP could be switched in many configurations (single I, single II, out of phase) but my Schaller got  a nice classic humbucker configuration.

pickup recomendations for a gibson ripper
« Reply #13 on: February 08, 2007, 02:28:01 AM »
hey man good luck,i'd love to see photos when done.are the pups in that pic standard mudbuckers, they look a little smaller.that bass hass only front routing, just less of it,but more angled drilling,i guess thats more work,i think the ultimate bass would be a cross between an EB3 and a RIPPER. the SG shape is sooooo coool,but its just too damn small ,the RIPPER rules 'cause its like a girl with a big ass,MEATY.
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

pickup recomendations for a gibson ripper
« Reply #14 on: February 09, 2007, 11:41:06 PM »
I think ive decided on pickups,
a quarter pound seymour duncan p bass pickup at the neck, and either a quarter pound jazz at the bridge or a seymour duncan music man pickup, im just worried about all the routing, and how to mount them, if ill screw them into the body or not.

your opinions are welcome...

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!