Vintage Guitar and Bass forum

epiphone thunderbird

epiphone thunderbird
« on: February 04, 2007, 12:02:18 AM »
what do you think of this bass

90s-Epiphone-Thrunderbird-Non-Reverse-Bass-HSC

what price should it go for too?

jules

  • *****
  • 3068
    • View Profile
epi non reverse bird
« Reply #1 on: February 04, 2007, 01:57:35 AM »
I love that bass - never tried one, and can't really say how much it will go for, but its such a nice colour. I saw one go (that I nearly went for) for £200 1-2 years ago. I really like the look and colour, but didn't bid because i'd never heard one. Theres a 5 string version too.

epiphone thunderbird
« Reply #2 on: February 05, 2007, 04:57:32 PM »
A sunburst one with some chips & dings just sold for just under $260 plus shipping. I've seen them go for above/below $400 in good condition. It's all a timing thing. Sometimes they go high, other times you can get a good deal! I'd like to get one and slap some cool pickups in it. It's been a long time, but once in a while a light blue one will show up.

epiphone thunderbird
« Reply #3 on: February 07, 2007, 08:11:05 PM »
I used to have a sunburst one.  Sold it on ebay for $350 a couple years ago.  It's not a bad bass, but nothing special.  The pickups don't have much punch but it does look cool.  I would say save up for something else.  I wasn't really impressed by it.  Some new pickups might completely change the sound though.

epiphone thunderbird
« Reply #4 on: February 08, 2007, 02:08:23 AM »
I have a couple of them. EMG's in one and Seymour Duncans in the other, I like them, nicely balanced, kind of a chunkier neck than my Gibson T-birds, they have easy access to the higher frets, pretty cool basses as far as I'm concerned.I say DO IT !

Pickguard
« Reply #5 on: February 08, 2007, 12:40:19 PM »
The pickguard looks so different to all the other Thunderbirds...Is this a different series?

doom

  • ****
  • 264
    • View Profile
epiphone thunderbird
« Reply #6 on: February 08, 2007, 09:23:56 PM »
Yes, it's a non reverse so the body style is different. I heard one last year and it sounded really nice.

epiphone thunderbird
« Reply #7 on: February 09, 2007, 12:26:29 AM »
Can one of you tell me what the width of the neck is at the nut on that model? Is it more of a P bass width, or like a Jazz? Thanks!

epiphone thunderbird
« Reply #8 on: February 09, 2007, 01:56:45 AM »
nut is 1 5/8, I prefer the 1 1/2 Gibson Thunderbirds & Jazz Bass necks, not a big fan of the P Bass, I do like the neck on my Epi Thunderbirds, kind of an in-between feel. hope that helps

epiphone thunderbird
« Reply #9 on: February 09, 2007, 03:05:55 AM »
Thanks for the info 10in! It does help! I'm not crazy about P necks either. I'm used to a T-Bird or a Jazz neck.

Price
« Reply #10 on: February 09, 2007, 08:36:27 AM »
...so, I'm thinking about buying this Bass...what do you guys think I should spend for it?

epiphone thunderbird
« Reply #11 on: February 09, 2007, 01:23:10 PM »
To me it's worth around $350 since it has a case and looks to be in good condition. Others might not spend that much, others might go a little higher. Considering what else sells in the $350 price range, I don't think these are a bad choice. Like I mentioned earlier one sold last week for $258 with a couple of good chunks out of the finish, and without a case. Someone paid over $100 dollars for an Epi T-Bird gigbag last week on Ebay, so you just never know how bad someone wants something. Good luck & lets us know if you go for it.

doom

  • ****
  • 264
    • View Profile
epiphone thunderbird
« Reply #12 on: February 09, 2007, 10:38:08 PM »
+1 on the 350$. Nice and kind of rare color on that one.

Got it..
« Reply #13 on: February 10, 2007, 09:38:53 AM »
...I got it...for 455 $. I'm living in Germany, so I had to get up at 4 am, but the Euro/Dollar exchange rate played on my side. The Bass now goes to my parents in Arizona and I have to wait till the end of march to get it...but I'm realy looking forward to it. So after all I got it for a bit less than a new Epiphone Thunderbird would cost in Germany...I think thats ok

jules

  • *****
  • 3068
    • View Profile
epiphone thunderbird
« Reply #14 on: February 10, 2007, 12:53:33 PM »
congratulations - I seriously doubt you'd have got it any cheaper in Europe.

You'll have to let us know what you think of it when you get it

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!