Vintage Guitar and Bass forum

Three pickup thunderbird

jules

  • *****
  • 3068
    • View Profile
Three pickup thunderbird
« on: December 08, 2006, 02:36:25 AM »
check out this page
http://www.tcgakki.com/smashfolder/inst/bass/a-Import02.html
 
scroll down for this beauty. A 1991 custom order. Gold hardware, and no black plastic pups. I wonder how much they charge to build one of these.

Three pickup thunderbird
« Reply #1 on: December 08, 2006, 12:26:23 PM »
Is it for sale still?

jules

  • *****
  • 3068
    • View Profile
still for sale
« Reply #2 on: December 08, 2006, 03:09:00 PM »
No, its gone.....

I'm sure Gibson would make you another though........

Three pickup thunderbird
« Reply #3 on: December 08, 2006, 05:57:27 PM »
There's been a few of those custom made in the 90s.  There was a pic of a red one (and another white one I think) floating around the Dudepit Gibson Forum.  The red one had pup rings tho IIRC.

jules

  • *****
  • 3068
    • View Profile
3 pup thunderbirds
« Reply #4 on: December 08, 2006, 07:19:17 PM »

 
yeah these are the ones - i'd lost the pics, but after a major trawl of my hard disk found them again. The white one could well be the same bass

Three pickup thunderbird
« Reply #5 on: December 11, 2006, 07:03:46 PM »
There was another pic of a red one - an action shot of some long-haired dude playing it on stage (geetard had a matching 3 pup Firebird) in some seedy bar.  I think that one had pup rings. Ask George about it - he'll remember.

mc2

Three pickup thunderbird
« Reply #6 on: November 08, 2009, 10:40:17 AM »
These were NOT custom ordered. Gibson Custom Shop did a limited run of SIX in 1991.....all red ones or white ones. A red one was featued on the Gibson calendar that year.

There was a 1990 black 3 PUP prototype made for the run....which I happen to own. I've run across/seen two of the red ones and two of the white so far. I hate red but tried to buy the white ones and missed them each time.
« Last Edit: November 08, 2009, 10:43:20 AM by mc2 »

Three pickup thunderbird
« Reply #7 on: November 09, 2009, 10:22:33 PM »
Quote

mc2 wrote - There was a 1990 black 3 PUP prototype made for the run....which I happen to own

I bet that's a cool looking bass. I'm not mad on the red one myself but the white does look sweet, as would a black one I'd imagine. 8)
 
G
 
http://www.myspace.com/motherlodeonline

jules

  • *****
  • 3068
    • View Profile
Three pickup thunderbird
« Reply #8 on: November 10, 2009, 08:49:28 PM »
Quote from: mc2;12312
There was a 1990 black 3 PUP prototype made for the run....which I happen to own.

 
Well we absolutely have to see that! Pictures please :)

Three pickup thunderbird
« Reply #9 on: November 10, 2009, 09:18:35 PM »
+1.   There should always have been a bass version of the Firebird V - the basic design is so strong it works equally well as a stripped-down T-bird II, or "pimped to the nines" as here.
Ultimate - for me - would be in that pale blue/turquoise '60's Gibson colour, nickel hardware/ pup's, and about 40 years of patina. :roll:

Three pickup thunderbird
« Reply #10 on: November 16, 2009, 05:20:29 AM »
Quote from: jules;12351
Well we absolutely have to see that! Pictures please :)

From what I've seen mc2 has probably the coolest collection of basses around and definitely knows his stuff.
And I'm sure I've only seen the tip of the iceberg.
« Last Edit: November 16, 2009, 05:25:34 AM by marcnorth »

white one
« Reply #11 on: August 29, 2010, 03:52:28 PM »
The 1991 white one was mine. The back story is that I have 3 old birds and was looking to replace my daily driver with one of the new ones but hated the black finish. I wanted nickel. I called the custom shop at Gibson and asked if they had it available. the woman who ran the shop, Betty, told me no. I asked if she could source it out for me and she agreed to do that and return my call later in the week. Well 2 weeks passed and one day she called me with some rather strange news. Seems they were running Firebird VII's on the line on friday (3 pu holes) and over the weekend changed to T Birds. the workman who came in on monday, thinking they were still doing FB VII's accidently routed two T-Birds with 3 holes. Not wanting to scrap them, Gibson contracted their own custom shop to make a matched set of 6 T-Birds for the calendar. All would be cardinal red, gold hardware,white P-guards, and 3 PU's. When she called me she asked if I was interested in one of the six. I said yes, but I wanted a white one. She informed me this was to be a matched set of six. I replied with well I have been playing Gibson basses for 30 years and could be playing Fenders and that they owed me this. She said she would ask the bosses at Gibson and get back to me. A few days passed and when she called she told me that #6 would be white with a black PG and gold embossed logo. So, there is only ONE white 3 pu bird out there and now you know the story on how it came to be.

Now as a player don't feel bad about missing out. Although it was a fine looking bass and rare to say the least, it was NOT a good sounding bass. And it was little compared to my old birds. In fact I hated it. It spent a few years in the case in the closet and really never got played. All my Birds are working basses so I took it to a guitar show in Orlando and sold it. As a collectible it is priceless, as a player...it sucked.

Best regards to all,

David "T-Bird" Lucas
« Last Edit: August 29, 2010, 03:58:32 PM by dubbletrubble »

jules

  • *****
  • 3068
    • View Profile
Three pickup thunderbird
« Reply #12 on: August 31, 2010, 03:47:57 PM »
great story David, thanks for sharing!

Three pickup thunderbird
« Reply #13 on: November 03, 2010, 01:33:57 AM »
The white one on the left was mine. No PU rings and I can see wear on the gold PU's. Good thing it's collectable, it sucks as a player. I'll take one of my old birds any day.

Three pickup thunderbird
« Reply #14 on: March 21, 2011, 12:32:19 PM »
$1600.00 in 91.

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!