Vintage Guitar and Bass forum

Inquiries regarding the 1981 Victory Artist Model

Inquiries regarding the 1981 Victory Artist Model
« on: December 03, 2006, 10:57:11 AM »
Hello,

  I recently purchased a 1981 Victory Artist in an antique sunburst finish, and let me tell you: This bass is incredible. In my opinion, it easily does circles around the Jazz Bass as far as versatility, tone and aesthetic. I am posting to find others who share my enthusiasm for this instrument, but also  to inquire as to whether or not there is any sort of  procedure surrounding the purchase of used instruments (lame as hell, I know). Should I take it into a shop? The only troubles I've had with it  thus far are that the action is a tad high and the 16th fret on the G string buzzes crazily. I would greatly appreciate any suggestions. Also, I am slightly suspicious of why the Victory was not at all popular. Is there anything gravely amiss with it that I should know about before becoming too attatched?

Inquiries regarding the 1981 Victory Artist Model
« Reply #1 on: December 04, 2006, 08:10:58 PM »
Yeah, take it in to your local shop for a setup.  It won't run more than fitty bones.  I suspect it just needs a bridge/truss rod adjustment.

I have Vic Standard - great neck and I love the upper register access. Great tone too.

They were popular at the time of release (compared to many other Gibby basses) -  Ted Nuggent's Bass Player used one as did the band trying out for the talent show just before Marty McFly's in "Back to the Future" (and they must have sold a bunch of them because they're always coming up on ebay).  The main reason they don't do well nowadays on the used market (lowest priced Gibby bass, but not the worst) is the weight - the all-maple construction makes the Victories rather heavy (the standard is a bit heavier then either the Custom or Artist models which have larger routes in the body to accomodate a second pickup and associated electronics).  Their popularity may also have been affected by a change in aesthetic tastes in the 90s when pointy guitars started falling out of style along with Hair Metal and the power ballad.

That being said, the average price of a Standard has gone up from about US$300 when I bought mine to $400-500, so the secret is getting out -  if you want a P sound, but with more balls and improoved ergonomics, and don't want to spend a grand, then get a Victory.

jules

  • *****
  • 3068
    • View Profile
Victory
« Reply #2 on: December 05, 2006, 12:09:46 PM »
Unfortunately there are no released shipping figures past '79, so theres no definate info on how they did sales-wise, but for some of their production run, they were Gibsons only bass model.

Compared to other older Gibsons they tend to be found in quite unmolested condition, which is a testament to their useability as instruments. You don't see them with added pickups or replaced bridges like some others

They are not old enough to be vintage, and it has not really caught the attention of any of the retro-loving bands that could popularise it

I predict that the next 10 years will see a revival in interest in, and prices of the victory

My victory artist is missing a couple switches - anyone got any parts?

Inquiries regarding the 1981 Victory Artist Model
« Reply #3 on: December 05, 2006, 07:13:11 PM »
In the 3 years I've been watching Gibson bass auctions on ebay I have seen only 1 Victory Standard (out of the few hundred that were listed) with the pup changed.  I've seen 0 modded Customs or Artists.

Modded Victory bass
« Reply #4 on: December 08, 2006, 05:13:13 PM »
There was a Victory bass at a local shop here that had the 2 pickups replaced with Jazz pickups. Not sure which model it was tho. I played it unplugged but didn't bother plugging it in cause there were other people doing serious business and since it was a small shop, I didn't want to be rude. It sold and ended up for sale on Ebay a couple of months later from a pawn shop in central Phx. It was missing a couple of switches, so I'm sure the original electronics were missing. Would have liked to hear it tho, just to see what it was like.

I'd like to get a Victory at some point. It would be a nice alternative to the more common  P-Bass.

Andy

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!