Vintage Guitar and Bass forum

Gibson EB3L restoration

jules

  • *****
  • 3068
    • View Profile
Gibson EB3L restoration
« on: November 27, 2006, 01:50:04 AM »
I've been restoring an EB3L for a couple years now, and at last its finished!

check it out!




I really should say my luthier friend Andy Viccars actually did the work, and its looking great, and plays great too

You can see more pics, and listen to clips here
or read about the restoration process here

its great when something finally gets finished!

Gibson EB3L restoration
« Reply #1 on: November 27, 2006, 08:45:09 AM »
Having seen this bass in the flesh (so to speak) on Friday, there is only one word for it:

MAGNIFICENT!!!!  :lol:

G

P.S. The restoration article on it is cool too.

www.motherlodeonline.co.uk

Gibson EB3L restoration
« Reply #2 on: December 11, 2006, 10:40:26 PM »
Beautiful restoration! Great story, too. I hope it sounds as good as it looks.

Do you happen to have any pictures of the bridge (with cover removed)? A friend of my is also doing a 3L restoration and his arrived with an aftermarket bridge.

Thanks,

R Wood

Restored Bass - Extrordinaire !
« Reply #3 on: December 15, 2006, 06:50:51 PM »
Yes Man, thats the way a EB-3 should look and play. Congratulations on reaching the finish line with your project. I am new to the group but I am posting a picture of my 69' (pots#) EB-3 that I have customized over my almost 40 years of original ownership.  I started by stripping the Cherry finish, oh was that a tough job and probably a mistake from the vintage point of view, but I was 17 and did not care. I gold plated all the metal. Later I added the Les Paul Triumph low imp. pickup 1974-5. The actual work was done by Alexander (Howard) Dumble of California amplifier fame. Check it out the gold plate is old and faded but the sound this old warrior makes is awsome.  The humbucking is low and powerful, and has a in/out phase switch for its two coils. The Low Imp. has the rotary switch with four voices from unbelievable pizzicato full bass to a Rickenbacker,  cut through any volume rock and roll and be heard, like treble. The only bass to beat it is my new made at home Warmoth Jazz bass. Thank you moderators for this great web stie !
Deep_Frequency :-D

jules

  • *****
  • 3068
    • View Profile
bridge
« Reply #4 on: December 16, 2006, 12:07:54 AM »
Quote from: R Wood
Beautiful restoration! Great story, too. I hope it sounds as good as it looks.

Do you happen to have any pictures of the bridge (with cover removed)? A friend of my is also doing a 3L restoration and his arrived with an aftermarket bridge.


Thanks very much.

I don't have a pic of the bridge from that bass, but its exactly the same as this



with the mute (which mine, but not all, had) it would look like this



I may put a mute back on mine, if one comes up at the right price

Gibson EB3L restoration
« Reply #5 on: December 16, 2006, 10:52:15 PM »
Jules,
Thanks for the excellent pictures; they help a lot.

Do the studs have a sort of flange underneath what we see on the bridge top, to raise or lower the action? (And also to help keep the bridge attached to the body?)



R Wood

EB-3 1969 bridge
« Reply #6 on: December 17, 2006, 04:40:04 AM »
Yes, the studs(posts)do have a flange.  This 2 post bridge is what I have on my 1969 EB-3. Gibson later and presently use a 3 post bridge for the reason that if you were to look at my bridge after 40 (soon to be) years of playing the holes in the bridge wear and the little bolt that tightens the bridge to the post no longer holds the bridge level. I have posted pictures of my bass and today a closer picture of a bridge mod I bought here on Ebay. It is just a bar of chome moly with holes for the strings to go through. The idea is to keep the windings of the end nut of the string further back of the bridge saddles, also a side benifit is added weight and mass to the bridge which adds sustain. It is a inexpensive(cheap) mod and I do think it adds sustain. I keep my bass on a stand right next to my computer desk and pick it up every chance I get.  Cheers. Pete Z.
Deep_Frequency :-D

EB3L restoration.
« Reply #7 on: February 20, 2007, 03:33:34 PM »
Hi everyone...i have a 1972 EB3-L. Nice condition but now looking a bit lived in. Thing is, i lent it to a friend and he decided to remove the selector chickenhead knob...and then lost it. I'm having a hell of a time finding a replacent. None of the usual supects like Rosetti or allparts seem to stock
the correct one. All i've been able to find are the smaller type ones. Any ideas???

jules

  • *****
  • 3068
    • View Profile
Chicken head knobs
« Reply #8 on: February 21, 2007, 04:16:35 AM »
Ebay is your best bet i'm afraid, you'll probably have to wait a while for an original, but right sized replacements should be no problem to find

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!