Vintage Guitar and Bass forum

Grabber info please

Grabber info please
« on: September 20, 2006, 02:46:11 AM »
Hi

1st time caller...

I bought a Grabber brand new in 1975 and had it shipped up from the U.S. to Montreal Canada. The serial # is 000000027 (give or take a 0 or 2)

I was told that this was the 1st one in Canada...how can I find out anything about this bass and if it is in any way valuable.

I am really glad that I found you folks (by accident) it seems as though most of the world has forgotten about this gem of a bass.

Thanks

Bill

jules

  • *****
  • 3068
    • View Profile
serial number
« Reply #1 on: September 20, 2006, 12:28:35 PM »
is iit a decal?

After the confusion of the 6 figure serial numbers of the sixties and early seventies they started a new, but short lived scheme of eight digit numbers, starting with 99, then 00. In 78 they started the scheme they use today. There seems to be instruments using different schemes, as if the numbering changes were not uniformly introduced.

The dates and timings of these are very confused - do you have any details of a precise date of order, or manufacture? I don't think the serial number will add to the value, but Grabbers generally go for $350-$700 depending on colour, condition, case etc

If I bought it from new, i'd probably hang on to it!

can we see some pictures?

Jules

Grabber info please
« Reply #2 on: September 20, 2006, 02:28:55 PM »
Thanks for the reply Jules,

Yes purchased new, the bill is kicking around somewhere


I am sorry but I do not know how to post photos on forums as of yet

Please share some instructions and I will be happy to do so.

Best regards

Bill

Grabber info please
« Reply #3 on: September 22, 2006, 04:18:40 PM »
A Grabber in good condition will go for CAN$600-800 in Toronto... maybe more if mint and a rare finish.

Grabber info please
« Reply #4 on: September 22, 2006, 06:08:04 PM »
Thanks for the info

If I can figure out how to post images, I will.

Does the low serial # make it worth any more ?  

Considering as how I paid $251.00 CDN $ for it back in 1975, I do not really think that it was a good return on investment...

Any thoughts on the value of a Woodson Bass Amp ?

Regards

Bill

jules

  • *****
  • 3068
    • View Profile
Grabber info please
« Reply #5 on: September 23, 2006, 01:02:10 PM »
Quote from: jellyman5264

Considering as how I paid $251.00 CDN $ for it back in 1975, I do not really think that it was a good return on investment...


Hi,

you have to have your image online somewhere - either in your own webspace, or you can upload it to a free image hosting site

Read this post for info on that

http://forums.vintageguitarandbass.com/showthread.php?224-Posting-on-the-vintage-guitar-forum&highlight=Posting+vintage+guitar+forum

Grabbers didn't go up in value as much as a lot of Gibson guitars - thats partially true of Gibson basses in general, but particularly so of the Grabber, because the Ripper and G3 are similar basses but with a greater array of sounds, but common enough to be affordable. Usually under $800USD.
Grabbers are also quite abundant, and fairly indestructable, so there are quite a few around.

Also, no recent star endorsements (You had Krist Novoselic playing Rippers, and Mike Dirnt playing the G3 - admittedly neither that recent)

Nothing wrong with the bass, just outshone by its siblings.....

Grabber info please
« Reply #6 on: September 24, 2006, 06:32:55 AM »
Thanks for the info

Will try to figure out the images

Best regards

Bill

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!