Vintage Guitar and Bass forum

GIBSON RIPPER PARTS - where to find?

GIBSON RIPPER PARTS - where to find?
« on: May 18, 2011, 09:54:13 AM »
hey folks,
i'm new member at this forum. i'm from germany so sorry for my bad english but i'll try my best in this case.

i'm glad about to find a forum where some gibson bass heads stick their heads together and discuss their passion.

so, for nearly 3 month i'm the owner of a gibson ripper L9-S like it is shown in the link beneath.
https://www.flyguitars.com/gibson/bass/1978gibsonRipper.php
my bass is missing the original trus rod cover,someone the preowner i guess screwd a badass bridge on that beauty and i'm looking for bridge cover.

maybe you guys have an internet adress where i can find second hand parts for old gibson basses ? i know from time to time ebay drops some parts.any further ideas?

maybe i would buy a trus rod cover thats blank and not original but just when someone says that it fits. i don't know if the screw space from today's trus rod covers is the same like 35 years ago!i don't want to drill 2 new holes in her headstock, you know.

and what about a bridge including bolts?in other threads some of you guys said that their is a bridge from supertone but i don't even like the look of that thing. think it would fit on a RD.

so long, would be cool if someone could help me out a little bit.
flanxter

GIBSON RIPPER PARTS - where to find?
« Reply #1 on: May 18, 2011, 12:59:52 PM »
eBay for the bridge cover-- however, when you track one down, ask for measurements before you buy.  There's a guy that's been selling covers saying they'll fit but they're sized for a different bass.

jules

  • *****
  • 3068
    • View Profile
Ripper parts
« Reply #2 on: May 18, 2011, 04:22:30 PM »
The supertone is a good bridge, probably better than the Gibson three point - but the bridge cover won't fit with one on, so if you want the original look, ebay is your best option.
 
They come quite often in the USA.
 
I see there is a bridge and cover at the bottom of this page
https://www.flyguitars.com/gibson/bass/parts/bridge/
 
But in the USA - i'd just bid on those if it will let you - lots of US sellers are happy to receive overseas bids on easy to post items, yet don't have it set as a default preference, so it doesn't list as such on the ebay site
 
And even if it won't let you bid, contact the seller and ask...
 
They are both pretty cheap at the moment, so worth going for

GIBSON RIPPER PARTS - where to find?
« Reply #3 on: May 18, 2011, 04:32:49 PM »
Bass Parts Resource does a Gibson EB3 bridge cover that fits the Ripper. Bottom left on the link. I know it says pickup cover and I'm sure it said bridge when I bought mine, but it looks like the same one. They're also on eBay, at the same price usually.

http://www.guitarpartsresource.com/bhardware_ashtrays.htm

For a Truss rod cover, I went to AI Guitars on eBay and just asked them to etch "THE RIPPER" on their standard Gibson replacement TRC. I sent him a picture of the original and it came out perfect.

CUSTOM-MADE-TRUSS-ROD-COVERS

or email Al Inteso (aiguitars at cox dot net).

Have to say I think the Hipshot thing is hideous.
« Last Edit: May 18, 2011, 04:39:20 PM by spinynorman »

GIBSON RIPPER PARTS - where to find?
« Reply #4 on: May 18, 2011, 05:55:28 PM »
thanks for the replies!

i was wondering when i checked ebay for parts and read the most USA sellers wouldn't ship to europe.so i think i have to hit them up ;)

Quote from: spinynorman;15942
Have to say I think the Hipshot thing is hideous.


that's true. it just looks terrible on a ripper.
i will try to get in touch with the guys for the truss rod and bridge covers.looks promising to me, thanks a lot! :)

jules

  • *****
  • 3068
    • View Profile
Ripper truss rod cover
« Reply #5 on: May 18, 2011, 11:37:51 PM »
Quote from: spinynorman;15942
For a Truss rod cover, I went to AI Guitars on eBay and just asked them to etch "THE RIPPER" on their standard Gibson replacement TRC. I sent him a picture of the original and it came out perfect

 
ahh, that is interesting. Any chance I can see a pic please?
 
TIA

GIBSON RIPPER PARTS - where to find?
« Reply #6 on: May 19, 2011, 02:44:57 PM »
Quote from: jules;15946
ahh, that is interesting. Any chance I can see a pic please?
 
TIA

At this point I hadn't screwed it in (still adjusting truss rod), but screws lined up exactly with original holes. When I ordered it I thought the bass was a 73 and had seen some pics of that year with plain black TRC, so that's what I asked for. I could have had the white edging if I'd wanted it.

BTW Jules, I sent you a PM. Did you see it?

« Last Edit: May 19, 2011, 02:45:50 PM by spinynorman »

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!