Vintage Guitar and Bass forum

Info on a RD standard

jubei

Info on a RD standard
« on: May 31, 2006, 03:32:53 PM »
hello

i am new here,im from the netherlands,and i would like to have some info about the rd basses.becaus i have one in sight.

its a rd standard in natural from 77(is a standard more rare then a artist?)
it costs about 700 dollars,it has some spots,on the body and neck,is this about a good price?oh jeah,and its with a case(not in very good condition)

thanks jubei

RD standard
« Reply #1 on: May 31, 2006, 07:11:19 PM »
Hello Jubei,

yes, that sounds a reasonable price assuming its in full working order. yes the standard is rarer than the artist. I assume you saw this page

RD standard

The RDs are nice basses, thats for sure

Standard
« Reply #2 on: June 01, 2006, 12:47:23 PM »
Yes, the standard is rarer, but is not as great sounding or as versitle as the Artist model. They are not as sought after as the Artist.

The price is on the high end as I have seen natural RD Artists  go for the high $700's

I think you would be happier with an Artist.

jules

  • *****
  • 3068
    • View Profile
RD Standard vs Artist
« Reply #3 on: June 01, 2006, 01:30:46 PM »
Hi, and welcome

is that $700 in the Netherlands, or $700 before shipping and tax from the USA?

If its the former, then thats not bad for Europe.

If its the latter, i'd probably suggest you wait - hold out for an RD Artist, like Redbird suggested (unless you really want passive electrics)

Its not that there is anything wrong with the standard - just that the artist is so amazing, it really is the one to get

Jules

Atrist
« Reply #4 on: June 01, 2006, 03:55:11 PM »
Quote
Its not that there is anything wrong with the standard - just that the artist is so amazing, it really is the one to get



There is no other bass that comes close to the RD Artist in many respects, weight, sonic versitility and it's one of a kind reliable Moog electronics.

There really is no other bass like it, that I know of?



 Above all they are killer in black


rd porn
« Reply #5 on: June 01, 2006, 08:22:33 PM »



Uwe has the ultimate porno RD- the near mint CMT


doom

  • ****
  • 264
    • View Profile
Info on a RD standard
« Reply #7 on: June 01, 2006, 08:58:36 PM »
I'm 99% sure I missed that Vintage Guitars linked RD (with gigbag) when a private seller had an ad out for 6700SEK. Less than a day later it of course was gone. The next week it popped up (how many do you think is circulating in Sweden? Not many. This one also with gigbag) in that store for 13500SEK.
1 US$ = ca 7.25 SEK 1 Euro = 9.25 Most Gibsons are higher price here than in the U.S.

That's why I jumped on this (with flightcase) for 8000SEK. I did'nt want to miss the opportunity once again.


Ebony
« Reply #8 on: June 01, 2006, 10:28:29 PM »
I sure love ebony, but blondes have more fun!

Or at least receive more torture?


Info on a RD standard
« Reply #9 on: June 02, 2006, 06:17:00 PM »
I'm not so sure that the Artist beats the Standard, I see it more as a tie. Yes, the Artist is active and flexible, but all the sounds you get from it sound severely souped up - this was the stone age of active basses, remember -, it's not a very natural sounding bass. The Standard does sound natural though, clear, but not sterile, with sufficient bass frequencies, but no fluffy ooomph.

Comes down to whether you prefer active or passive I guess.

Uwe

jubei

Info on a RD standard
« Reply #10 on: June 02, 2006, 09:57:18 PM »
thanks for the info everybody.


but if i can get it for around 525 euros(around 675 dollars)that would be a good price??

doom

  • ****
  • 264
    • View Profile
Info on a RD standard
« Reply #11 on: June 02, 2006, 10:47:37 PM »
For Europe I'd say that's a nice price. Like Jules said earlier it could be had for less in the U.S but shipping and insurance would probably make in more expensive in the end than the one you're planning on buying.

Info on a RD standard
« Reply #12 on: June 07, 2006, 01:38:42 PM »
Hey Redbird, there's one of those nice figured maple RD Artists on the bay now;

1978-Gibson-RD-Artist-Bas

G

www.motherlodeonline.co.uk

RD Standard
« Reply #13 on: June 15, 2006, 02:06:57 PM »
I was just talking to a guy who had an RD Standard. He said the thing sounded great, like a Fender Jazz bass. He also said it was heavier than the Artist, as the Artist has a large amount of wood routed away for the large moog circuit boards.

A wide strap is essential for an RD.

He also said he used to have an Epiphone Embassy. He said it sounded better than the T birds that he played of the same era. He said the bad part of the Embassy was it was really neck heavy.

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!