Vintage Guitar and Bass forum

Limited Edition Epiphone Ripper Bass

Limited Edition Epiphone Ripper Bass
« on: April 04, 2006, 05:52:40 PM »
Hi Everybody,

I'm new to this forum but have been checking it regularly without registering. It seems very helpful so i think i will stay here.

I have been looking to find information about the new Epiphone Ripper Bass after reading about it on this forum. After searching the internet for hours on end, i've finally got this information to share with anybody who is interested in the new Limited Edition Epiphone Ripper Bass. This is especially helpful for anyone in the UK.

This is the reply i got from an e-mail to Rosetti, who distribute all Epiphone and Gibson guitars and basses in the UK.

************

Dear Richard,
 
Thank you for your enquiry.
 
a) When will the Ltd. Ed. RIPPER Bass be available?
The Epiphone Ltd Ed Ripper Bass is due to be available in the UK in September '06 (We cannot be more specific at this time).
b) Which UK dealer/s will have the Ltd. Ed. RIPPER Bass ?
This model will be available to all our dealers.
c) How i can get one?
To ensure you get to purchase an Epiphone Ltd Ed Ripper Bass, I recommend ordering it with your preferred dealer ASAP.
Your preferred dealer will then be able to place the order with us.
 
Please click on the following link to the dealers page of the Rosetti website where all our dealers are listed with their contact details http://www.rosetti.co.uk/dealers.htm
Kind regards

Chris Gibbs
Rosetti Ltd

************

I hope this helps anyone who was looking for information about the new
Limited Edition Epiphone Ripper Bass. If anybody else has anymore information on this bass, please post it here.

I am also looking to know more about the previous Epiphone Ripper i have heard about. What years was this made? How many different Ripper's have Epiphone made? And have they made any copies of the Grabber or G-3 aswell as the Ripper?

And finally, does anybody know if Gibson and Epiphone have any plans to release the Grabber, Ripper and G-3 again. I think these basses would do well if they were released by either or both companies. It will be a shame if they only make the Ripper as a Limited Edition and never release it again as i think it really challenges the P-Bass, which seems to be the textbook bass for many beginner/intermediate bassists these days, and it definately is more original.

Look forward to hearing from you,

Richard James

jules

  • *****
  • 3068
    • View Profile
new ripper
« Reply #1 on: April 04, 2006, 10:39:09 PM »
Hi Richard

thanks for that info.

As far as I know there are no plans to re-release the grabber or g3, and the ripper was only re-released once before. It was a single pickup model with bolt-on neck

if you do a google image search you'll find pics

I think the new model is going to be an improvement on the old reissue, but also quite different from the original. It will certainly be interesting to see it.

I think they missed out on all the green day hype by not releasing a G3 a few years back, but Gibson have never been a company with their finger on the pulse. Look back at all the sixties advertizing they did and you will find hardly any mention of all the Gibson using legends we think of today - but plenty of  old jazz and country players who looked out of touch even back then. They probably were amazing players but it really underlined the companies conservative attitude back then

Jules

Limited Edition Ripper Bass
« Reply #2 on: April 06, 2006, 04:50:31 PM »
Hi,

I've just got some more information on the Limited Edition Ripper Bass incase anybody was wandering the RRP


************

Hello Richard,
 
Code      Description                           Finish    Price
31R2    Limited Edition Ripper Bass    AN      £469.00

 
Kind regards

Chris Gibbs
Rosetti Ltd

*********

£469 is around $800 US. So you guys will probably be able to get the bass for $689 or something, as everything is cheaper in the states than here in England.

For an Epiphone with a price tag like that, i expect this to be an amazing bass, and i hope i am not let down when i get mine...

Hope this helps anyone who was eager to find out about the New Ripper,

Let me know if you found this useful!

Take it easy x

Limited Edition Epiphone Ripper Bass
« Reply #3 on: June 10, 2006, 03:09:43 AM »
http://www.music123.com/Epiphone-Ltd-Ed ... 4410.music

And there it is, for $349 shipped from Music 123. Wow. I wish i could get one of those shipped to the UK.

It is going to cost me £489, the equivalent of around $800 US !!!

Let me know what you think of these basses if you have bought one!

Thanks.

santi

  • ***
  • 133
    • View Profile
Limited Edition Epiphone Ripper Bass
« Reply #4 on: June 11, 2006, 04:46:38 PM »
Hi everybody:
I own an Epi Ripper made in Korea (1997).
It is very well built, the body is two pieces of  maple (some flamed) and firgerborad is birdseye maple. I fixed a Schaller bassbucker pickup at bridge position and Gibson Scaller tuners (new old stock from USA Ebay). Its factory code prefix is "L". Many other Epi Rippers are "I" or "U", (another Korean factorieies). Very good bass now!

Limited Edition Epiphone Ripper Bass
« Reply #5 on: June 12, 2006, 05:14:53 PM »
lets have some pics, please!

santi

  • ***
  • 133
    • View Profile
Limited Edition Epiphone Ripper Bass
« Reply #6 on: June 13, 2006, 07:36:43 PM »
I don´t know to insert pics, sorry, but I can send you some pics to your email if you let me know it. Or, somebody can explain me how insert images? :oops:  :oops:

jules

  • *****
  • 3068
    • View Profile
posting
« Reply #7 on: June 14, 2006, 01:52:28 AM »
see this post for posting instructions - but if you can't work that out email to me and i'll post them

santi

  • ***
  • 133
    • View Profile
Limited Edition Epiphone Ripper Bass
« Reply #8 on: June 14, 2006, 08:14:39 PM »
Tahnk you!! :wink:

jules

  • *****
  • 3068
    • View Profile
Epiphone Ripper
« Reply #9 on: June 16, 2006, 12:45:20 AM »



santi

  • ***
  • 133
    • View Profile
Limited Edition Epiphone Ripper Bass
« Reply #10 on: July 26, 2006, 10:36:55 PM »
:lol:  :wink: BTW

nice bass
« Reply #11 on: August 08, 2006, 06:19:56 PM »
hey i bought the same bass online and will be getting it in a few day, just wondering how you put the other pick up? did you have it done or did it yourself? i was planning to add another soapbar pick up. thanks

santi

  • ***
  • 133
    • View Profile
Limited Edition Epiphone Ripper Bass
« Reply #12 on: August 08, 2006, 09:19:58 PM »
Well, congratulations, the Epi Rippers are good basses. I fixed a Schaller Bassbucker pickup. It is a very very good pickup. Well, I I needed to make a hole in the body for the new pickup. I do not have good tools, but with a drill and many patience... I fixed two switches. In this way I can select bridge pickup, neck pickup, both or none. But an toggle will be good too. Good luck.

grain
« Reply #13 on: August 08, 2006, 09:47:22 PM »
Really nice grain pattern on the body.

awesome
« Reply #14 on: August 09, 2006, 12:39:58 AM »
thanks. cant wait to get it and start doing the mods. your bass looks really good. awesome

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!