Vintage Guitar and Bass forum

Grabber reissue next week...

Grabber reissue next week...
« on: February 20, 2009, 11:54:58 PM »
Have any of you seen this one coming?  
Gibson is reissuing the  Grabber  as a "limited run"   Grabber 2
We'll have to wait until next week, unless there are some NAMM spy shots floating around.
[/url]http://www.gibson.com/en-us/Lifestyle/Features/introducing-the-holy-x-plorer/...

Re: Grabber reissue next week...
« Reply #1 on: February 21, 2009, 01:14:07 AM »
[attachment=0:16ivrhto]BAG2SECH1-Finish-Shot.jpg[/attachment:16ivrhto]

msrp $3192


http://www2.gibson.com/Products/Electri ... -Bass.aspx

jules

  • *****
  • 3068
    • View Profile
Re: Grabber reissue next week...
« Reply #2 on: February 21, 2009, 12:12:23 PM »
As Grabbers go, I think it actually looks quite good.

I've no idea what Gibson are up to price-wise though. Perhaps they just put a taster out and see how many pre-orders they get before deciding to actually make them?

There are enough 'what Gibson bass would you like reissued' threads on various forums, and the Grabber usually figures quite highly. Are they just giving us what we want?

I suspect there are enough collectors and bankers with bonuses out there to sell some. All 350...?

We'll find out if they are on ebay at $800 in 6 months - just like the SG Supreme and Money bass were

Re: Grabber reissue next week...
« Reply #3 on: February 23, 2009, 02:01:54 PM »
And of course it has a TB humbucker in it. How did I know it would have that? Maybe because Gibson refuses to make more than one bass pickup? (I guess they do make the mini humbucker for the SG reissue) But Jeeeez. You may as well have loaded it with EMGs. You are going to have an old looking bass that sounds new.

Actually, its more of a ripper than greabber. Set neck, 3 point bridge....And then Epiphone had the "ripper" that was more of a grabber. lol Go figure.

Re: Grabber reissue next week...
« Reply #4 on: February 23, 2009, 02:18:16 PM »
So It's really a GRIPPER !
I don't mind that they don't accurately repop the original design... It would cost a lot of money to retool their production.  That Flying V headstock looks just like the V Factor shape that is currently in production.  
Could this be a hint that the Flying V Bass could happen next???

jules

  • *****
  • 3068
    • View Profile
Re: Grabber reissue next week...
« Reply #5 on: February 23, 2009, 03:12:31 PM »
A lot may depend on how well or badly these sell. Gibson certainly like to offer classic models, and limited runs seem to be no problem for them. It allows them to justify steep prices, and persuades the collectors to snap them up quickly before they are gone.

How many Gibson bass collectors there actually are is another question. In the long run, I can't see Gibson adding another model to their bass line (with the possible exception of the Les Paul) on even a semi-permanent basis.

But i'm sure there will be limited edition artist versions, studio versions and reissues. Sooner or later someone big will get attention with a Flying V bass, and ten years after they've stopped using it, Gibson will put out the reissue  :roll:

Re: Grabber reissue next week...
« Reply #6 on: February 23, 2009, 09:24:41 PM »
Quote
How many Gibson bass collectors there actually are is another question.

Only one.

Re: Grabber reissue next week...
« Reply #7 on: February 23, 2009, 09:30:14 PM »
I don't believe it, finally they've actually looked at what people want! It's a shame they wait until a global recession before they  do it :lol:

I have to say, it all looks a bit slick though for my taste. At least disguising the TB in a black plastic cover would have looked better and a satin finished neck, come on!? Still it's a step in the right direction I guess.

G

http://www.motherlodeonline.co.uk

jules

  • *****
  • 3068
    • View Profile
Re: Grabber reissue next week...
« Reply #8 on: February 24, 2009, 01:22:02 AM »
Quote from: Redbird
Quote
How many Gibson bass collectors there actually are is another question.

Only one.

Yeah. I wonder what will run out first - the number of permuatations and combinations of Gibson bass, or the space in his office.

mrbass

  • ***
  • 124
    • View Profile
Re: Grabber reissue next week...
« Reply #9 on: February 27, 2009, 02:33:09 AM »
The price is down a lot already in the US. Has anybody seen them available in the UK?

Ricky

Re: Grabber reissue next week...
« Reply #10 on: February 28, 2009, 01:54:35 PM »
I work in a store in Belgium and I already ordered 2 :p
Can't wait to get my hands on these babies, but they won't come until April...

I've seen the price drop here too, with about a third so UK should follow along with the rest of Europe. If not you can plan a road trip to Belgium for a weekend ;-).
- \'82 Gibson Victory Standard
- \'72 & \'78 Fender MusicMaster Basses
- \'50s / \'60s Egmond Princess 2
- Fender BG-32
- ...
Proud endorser of Crime Industries: http://profile.myspace.com/index.cfm?fuseaction=user.viewProfile&friendID=63949227

Re: Grabber reissue next week...
« Reply #11 on: March 02, 2009, 03:01:14 AM »
Just so you guys know, I have been quoted $1900 for this bass at a local dealer in Atlanata. Nice decrease in price, but still rediculously high, in my opinion.

jules

  • *****
  • 3068
    • View Profile
Re: Grabber reissue next week...
« Reply #12 on: March 02, 2009, 03:15:09 AM »
Quote from: DeGecko
I already ordered 2 :p

Cool - looking forward to the review.

I just ordered the Epiphone pro tbird, and was told a similar timeframe.

It almost looks like they are waiting to see if they get orders before they build them.

Re: Grabber reissue next week...
« Reply #13 on: March 02, 2009, 05:31:48 AM »
It's fascinating to me that Gibson puts black covers on TB pickups in Thunderbirds, where looks like **** and nickel or chrome would be appropriate, and a chrome cover on a TB pickup in a Grabber reissue where black would be appropriate...

Re: Grabber reissue next week...
« Reply #14 on: March 02, 2009, 07:31:21 PM »
Quote from: anyfour
Just so you guys know, I have been quoted $1900 for this bass at a local dealer in Atlanata. Nice decrease in price, but still rediculously high, in my opinion.

I'll have to feel and hear it first, but they're pretty in the Gibson price range just like the Thunderbird...

That reminds me, I'll have to look into the new Epi's 'cause I want to try them out too :p
(God, I love working in a store :D)
- \'82 Gibson Victory Standard
- \'72 & \'78 Fender MusicMaster Basses
- \'50s / \'60s Egmond Princess 2
- Fender BG-32
- ...
Proud endorser of Crime Industries: http://profile.myspace.com/index.cfm?fuseaction=user.viewProfile&friendID=63949227

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!