Vintage Guitar and Bass forum

Poll

Whats the best sounding bass?

he Ripper
7 (50%)
he Grabber
1 (7.1%)
he G3
6 (42.9%)

Total Members Voted: 11

Grabber, G3 and Ripper

Grabber, G3 and Ripper
« on: November 16, 2008, 12:14:52 PM »
Hello. I was wondering if any one can help me out. I have a '78 Ripper and a '75 G3. Both fantastic basses apart from one design flaw... they are both neck heavy the G3 more so. I take it this is the same for the Grabber as well as it is the same setup as the G3.I have seen a few people who have tried to over come this by lowering the base strap button. I've tried this on my G3 and it has made things worse. I was considering a small counter weight on the strap, I dont mine the extra weight on the G3 as its as light as air. Any thought people? Any input is greatly appreciated
Thanks
The Ripper

jules

  • *****
  • 3068
    • View Profile
Ripper
« Reply #1 on: November 16, 2008, 08:07:54 PM »
Well I vote for the Ripper... though I know many disagree


Have you got your bridge cover on?

I don't find neck heaviness too much of an issue with these.

Hang some excess lead over your strap - rather than going straight to the floor.
You'll need a long heavy lead, but you can use the extra weight that is hanging rather than resting on the floor as a counter-balance

Jules

barend

  • ***
  • 163
    • View Profile
Grabber, G3 and Ripper
« Reply #2 on: November 17, 2008, 09:17:01 AM »
well I vote the G3 for sure. I had a Ripper but there is only one good sound in that bass and that sound is not so outstanding as the G3 sound in my opninion.

I have two G3's right now. One maple and one black alder. Both don't have neckdive. The alder one maybe just a little bit because it's lighter bodyweight., but nothing to worry about.
I love the G3 sound because it is very clear and cuts through everything. I don't like too much boom and mud.

I am selling the maple one, because I like the looks of the black one better. The sound is more or less the same. The maple one being a little bit more aggresive.

Grabber, G3 and Ripper
« Reply #3 on: November 17, 2008, 02:21:13 PM »
I agree with Barend....I only like 1 sound on my ripper. BUT that one sound os super sweet. I dont know if I can say I like it better or worse than the G-3. I think my G-3 has S-1 pickups in it (restoration with greatdealz pickups). Seems WAY hotter and warmer than a G-3. But the tone of the ripper has so much warmth. I dont like the other 3 settings, but #3 is awesome for me. I think thats both parallel.

Grabber, G3 and Ripper
« Reply #4 on: November 17, 2008, 04:36:05 PM »
Thanks for the input but I have to agree that the No. 3 setting on the ripper is the only one i use. I have only had my G3 a week now and I feel it is by far a better sounding bass compared to the ripper. But back to the orginal point, so no one can honestly say they have had not issues with the neck heavy G3? I think I will consider a weight on the strap base.
So not one has mentioned the Grabber, I take it sound wise it does not compare sound wise?

Grabber, G3 and Ripper
« Reply #5 on: November 17, 2008, 04:41:59 PM »
I have never had an issue with neck dive on my G-3 or ripper, but I also use leather straps that are suede on the bottom, so it creates a bit of friction. Maybe try that?

barend

  • ***
  • 163
    • View Profile
Grabber, G3 and Ripper
« Reply #6 on: November 18, 2008, 09:37:43 AM »
Quote from: The Ripper
But back to the orginal point, so no one can honestly say they have had not issues with the neck heavy G3?


like I said I have two G3's. The maple one is much heavier (really a lot heavier then the maple, maybe two times as heavy) and doesn't have any neckdive at all. The alder one is really light (like yours I guess) and only has a little bit neckdive, but nothing serious. I have had basses like the Epiphone EB3 which have way more neckdive (too much too handle).

One more question about the G3. Last few rehearsals I was experiencing some feedback with my G3. When I didn't touch the strings it started feedbacking right away. I Didn't have this problem with any other bass before.
We don't play extremely loud or so. Anyone ever had the same problem?

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!