Vintage Guitar and Bass forum

I got a Gibson EB-0F. DONE!

I got a Gibson EB-0F. DONE!
« on: August 29, 2008, 03:57:23 PM »
Hiya! 8) 8)

I just bought a Gibson EB-0F, to be honest I didn't know that it was one when I bought it.  :lol:
Although it has all the hardware changed including the pickguard. So now I'm going to restore it, or atleast make it look nice. :P

I've found schematics for the Maestro FZ-1 fuzz pedal here:
http://www.schematicheaven.com/effects/ ... a_fuzz.pdf
It's the same that was used in these basses right?


Do someone have an EB-0F with pickguard and can measure it, take some pictures or something. If I get pictures that's good enough I know a guy who can make me a new one. So if you have some good close up pictures of one please don't hesitate to post it here or send them to me. :)
Mine is built in 1962 so it should look like this:

Not like this:

But except that the later one is made out of two pieces, the part with the fuzz-effect can be removed seperately, I don't know the difference. So if you got a good picture of either of them. HOLLER! ;) :mrgreen:



Thanks!

Dave W

  • ****
  • 433
    • View Profile
I got a Gibson EB-0F. DONE!
« Reply #1 on: August 30, 2008, 01:14:08 AM »
At least one member here owns one (donnervogel), I can't remember which year. I had a 62 but sold it about 10 years ago.

IMHO the fuzz circuit is worthless as a useable tone. If I still had an original EB-0F, I'd never take it out, but if I were in your shoes I wouldn't waste a minute trying to recreate the circuit.

I don't know the circuit details, but it's passive.

jules

  • *****
  • 3068
    • View Profile
I got a Gibson EB-0F. DONE!
« Reply #2 on: August 30, 2008, 02:16:01 AM »
Hi Knedy, and welcome

I'm in the same position as you. I have a later period EBOF probably 1965 - but no scratchplate or wiring. It was converted to an EB3 at some point and needs quite a bit of work. I was just waiting for the day the original parts came up on ebay. If I get bored waiting I may do a custom. Haven't decided 100%.

I would be really interested to know what you do....

I got a Gibson EB-0F. DONE!
« Reply #3 on: September 01, 2008, 10:14:58 PM »
So.. I'll get a fuzz that I know is great instead of a replica of the old crappy one. Thanks!  8)


Any opinions about what I should do with the bridge? Someone has replaced the original one with a late '60s-70s. An original bridge is hard to find, expensive and also pretty crappy. Should I keep it or look for the right one? Well, that's more of a retorical question more than anything because of the reasons I just wrote. :P

But should I get a bridge cover for the bridge(as it was on the later '60s EB:s) or should I put the cover between the bridge and pickup as it "should" be?

doom

  • ****
  • 264
    • View Profile
I got a Gibson EB-0F. DONE!
« Reply #4 on: September 02, 2008, 03:22:12 AM »
I'd keep the bridge and put the cover between pickup and bridge.

jules

  • *****
  • 3068
    • View Profile
go original
« Reply #5 on: September 02, 2008, 12:39:30 PM »
Yeah, I prefer originality as much as possible, but sometimes it just gets too hard when parts never come up. As for the bridges, now the new holes are there, it wouldn't really do any harm to use them. Do you have either hand rest (bridge cover)?

eb-0f
« Reply #6 on: September 07, 2008, 02:48:41 AM »
knedy,

can i ask how much you paid for the eb-0f? i'm looking...

Re: I got a Gibson EB-0F. Help!
« Reply #7 on: April 30, 2009, 03:07:56 PM »
Okay! Here it is, boys! It cleaned up nicely! ;)


The Dimarzio and late '60s bridge is still on, but whatever. It sounds great and the intonation is way better than with the original bridge. :mrgreen:

doom

  • ****
  • 264
    • View Profile
Re: I got a Gibson EB-0F. DONE!
« Reply #8 on: May 01, 2009, 10:36:57 PM »
Wow. The pickguard turned out great! I would put a Mudbucker in there but as long as you're happy with the sound it's all that matters.

Dave W

  • ****
  • 433
    • View Profile
Re: I got a Gibson EB-0F. DONE!
« Reply #9 on: May 02, 2009, 07:32:07 PM »
Looks great!

jules

  • *****
  • 3068
    • View Profile
Re: I got a Gibson EB-0F. DONE!
« Reply #10 on: May 02, 2009, 11:57:11 PM »
Yeah that's great - good job indeed

how did you do the lettering? What fuzz circuitry did you use in the end? How does it sound now?

Re: I got a Gibson EB-0F. DONE!
« Reply #11 on: May 06, 2009, 03:24:09 PM »
Quote from: jules
Yeah that's great - good job indeed

how did you do the lettering? What fuzz circuitry did you use in the end? How does it sound now?

The guy who did the rest of the renovation used one of those huge CNC-machines I believe. I've never seen how it should look original but it's truly beautiful!  8)

I got the fuzz from Moody Sounds( http://moodysounds.com/index.php?main_page=index&sort=0 ), it's alot like fuzz face. Very dirty and mean sounding. It's stringed with D'Addario Chrome-strings at the moment but I'm thinking about getting some rounds instead to get an even "evilier" sound.  :mrgreen:

jules

  • *****
  • 3068
    • View Profile
Re: I got a Gibson EB-0F. DONE!
« Reply #12 on: May 07, 2009, 05:32:39 AM »
Quote from: knedy
The guy who did the rest of the renovation used one of those huge CNC-machines I believe

He did a great job - I don't suppose you can pm me his details - I need one of those guards, and if he has the template already....

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!