Vintage Guitar and Bass forum

1976 Ripper Bass bridge saddle?

1976 Ripper Bass bridge saddle?
« on: August 01, 2008, 08:56:17 PM »
Hello! New member to the board here. Let me first say I have been in awe of Gibson bass guitar ever since I saw photos Krist Noveselic from Nirvana back in 1994. As I got older and actually started PLAYING bass, my interest in Gibson basses only grew and this past year I was able to get a Grabber (in a good trade, I traded a Korg Poly-800 and got a Grabber!) as well as a Ripper.

However, there is a problem that I'm hoping someone here can help with.

The Ripper is missing the saddle on the bridge where the G string is supposed to be. I have tried ordering them from All Parts, but the saddles are too small to fit in this bridge, so I was curious of anyone knew where to get a vintage 3 point bridge saddle?

Any help would be great, and I look forward to getting to know everyone.

-Darrel

jules

  • *****
  • 3068
    • View Profile
Saddles
« Reply #1 on: August 02, 2008, 02:11:01 PM »
Hi and welcome.

Well generally saddles do come up (with the entire bridge though) on ebay quite often. I think you will find this the easiest source for these, and I don't think any of the aftermarket replacements are exactly the same size. Can anyone confirm this?

You can of course replace the whole bridge (maybe only temporarily until the right parts come up)

Lots of people like these Hipshot Supertone bridges that fit with no adjustment necessary.

Then again someone here may have a saddle spare... anyone?

1976 Ripper Bass bridge saddle?
« Reply #2 on: August 02, 2008, 07:04:03 PM »
Yeah, I think I'm gonna have to bite the bullet and replace the bridge. I was really hoping that would not be the case, but it seems to be my only option.

I actually did find one on eBay, with a lot of other Gibson guitar pieces, and at the LAST second someone snipped it from me. I then e-mailed the guy and he said that was the piece he didn't need, and would put it up for auction. Of course, he never did, and now he won't return my e-mails.

Ah well.

New bridge here I come!

1976 Ripper Bass bridge saddle?
« Reply #3 on: August 03, 2008, 07:25:54 PM »
I am not familiar with the set up of a ripper bridge.

But I got hold of an beat up Grabber. It didn't have anyy saddels on it.
A local guitar shop had 4 saddels that actually belonged to a 5 string musicman//stingray bass.

Them 4 saddles were a perfect fit for the grabber bridge-bass plate.

I got the saddles quite cheap since it was a 5 string set up with one saddle missing.
www.shaggablesluts.nl (snotty \'77 inspired punk rock&roll)

1976 Ripper Bass bridge saddle?
« Reply #4 on: August 03, 2008, 07:58:58 PM »
That might be something to check out, thanks for the suggestion. I'll talk to the guy I get my guitars repaired at, he might have a suggestion or two.

I can't speak for all Grabbers, but my Grabber doesn't have a 3 point bridge like the Ripper does.

1976 Ripper Bass bridge saddle?
« Reply #5 on: August 03, 2008, 08:22:22 PM »
Oops just saw your 1st post about the 3point bridge.

Sorry my grabber doesnt have a 3 point either.Mine has a sort of  Fender type bridge.
www.shaggablesluts.nl (snotty \'77 inspired punk rock&roll)

1976 Ripper Bass bridge saddle?
« Reply #6 on: August 03, 2008, 09:19:54 PM »
please post a picture of the bashed up grabber, im interested if youd part with it!:D

1976 Ripper Bass bridge saddle?
« Reply #7 on: August 03, 2008, 11:19:24 PM »
I'll post a pick later this week. And even open a special topic for it (it was a G1 grabber but i've added 2 G3 PU's :-)

But dont get your hopes up. I would never part with the monster!! That grabber is one of the ugliest bass guitars I own. But It's my main axe nowerdays 'cause I simply love that gritty and dirte tone.
www.shaggablesluts.nl (snotty \'77 inspired punk rock&roll)

jules

  • *****
  • 3068
    • View Profile
Three pickup grabber
« Reply #8 on: August 04, 2008, 03:54:41 AM »
Quote from: Shag-Wim
a G1 grabber but i've added 2 G3 PU's


Sounds interesting... how have you wired it up? Same as a G3? just single coils?

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!