Vintage Guitar and Bass forum

Grabber Neck Plate

Grabber Neck Plate
« on: July 02, 2008, 02:07:36 PM »
Hey guys

I've had a scout about the site and the forum and can't seem to find the answer to my question.

The neck plate for a grabber, anyone got any dimensions for it?

Cheers

Grabber Neck Plate
« Reply #1 on: July 03, 2008, 02:02:31 PM »
No one got the info?

Just recently aquired a bit of a bust up G3 and it's missing the neck plate. Just wondering if any neck plate will do or the dimensions of a G3 one to get one made.

Typically I also need the bridge cover. But most folks do :D Will any Gibson bridge cover fit or are there G3 specific ones? I had found a thread the other day about it, but can't seem to find it now!

Grabber Neck Plate
« Reply #2 on: July 09, 2008, 07:36:25 PM »
Well i had a Bride cover from an old Aria ripper copy which fit on my G-3.
Show me some pics, gotta love the g-3.
if its for sale im interested!!

Grabber Neck Plate
« Reply #3 on: July 09, 2008, 08:33:42 PM »
The plate itself is 3" x 1 3/4" outside diameter. The hole centers are 2" x 1 1/8".

And Bobsaget, I liked your avatar so much I Just rebuilt a Grabber to a G-3 and it looks like yours now. I`ll post pics and sound clips soon. Does yours have a maple or rosewood fingerboard? I replaced mine to rosewood, but your pic is too dark to tell.

Grabber Neck Plate
« Reply #4 on: July 10, 2008, 12:14:16 AM »
yeah mines maple, or whatever it is, deffinatly not Rosewood.
I got the pg& body from one place and the neck from another:)

Grabber Neck Plate
« Reply #5 on: July 15, 2008, 01:54:56 PM »
Cheers for the info dude. That's enabled me to get a new one knocked up. Waiting for the replacement pickguard and she'll be pretty much good as new apart from the odd ding to the body.

Anyone got any recomendations for a decent gig bag that'll fit the beastly proportions?

Grabber Neck Plate
« Reply #6 on: July 15, 2008, 04:53:51 PM »
I have 3 bags that fit well. Guitar center sells a roadrunner thats a very snug padded fit. I also have an Ibanez and Yamaha that both fit well, too. Best thing is to take the monster to a local store and just see what they have.

Grabber Neck Plate
« Reply #7 on: July 17, 2008, 12:02:55 PM »
Turns out the Ritter gig bag I had for my Epi flying V fits perfectly. So there's a tip for y'all if you're looking for a good soft padded back for Rippers, G3s or Grabbers. It fitted nice and wasn't too snug. Bonus.

Grabber Neck Plate
« Reply #8 on: July 17, 2008, 01:38:14 PM »
You should post some pics.

Grabber Neck Plate
« Reply #9 on: July 17, 2008, 02:20:27 PM »
Yeah I only have a couple at the mo' that came off the ebay auction. None of my own taken yet. She only arrived the other day. She's a bit beat up. Think it's going to be a bit of a project. There's a coupla really bad dings and wear of paint in general round the side closest to you as you play. As I said the neck plate was missing. The pots are pretty rusty and the scratchplate has a corner missing.

But I'm looking forward to tinkering and getting her back up and running. Any hints and tips are welcome  :P  As it is she still plays fine. And aye...I'm one of those folk who personify basses and female entities,  :lol:









It's not actually me that's the bass player in the family mind. I'm just the guitarist/tinkerer of all things stringed. It's actually my better half who plays bass and she's always been an Epi/Gibson girl. Although the G3 will be her first Gibson. I think she almost exploded when I said I'd gotten one of ebay. Below is a pic of her playing her Epi Les Paul in August 2006



We love the colour and almost quilted effect that bass has taken on. It didn't look like that when it was bought off ebay in Jan 2006. We have no idea how it ended up looking like that.

And back when she was 19 she was playing the Epi Flying V. She's still got it but the head heavyness of it makes it a pain in the butt to play for any length of time.


Grabber Neck Plate
« Reply #10 on: July 17, 2008, 06:23:33 PM »
Nice Grabber. Looks in pretty decent shape. Shouldnt be too much to get it back to very nice condition.

Great looking LP and V, btw. And your better half must be pretty small. That LP looks monsterous on her! :-)

Grabber Neck Plate
« Reply #11 on: July 17, 2008, 07:19:55 PM »
Aye it's mostly cosmetic. It plays super. The neck was in real good nick apart from some wear and tear to the frets. Really with a respray, new bridge and new scratchplate she'll be good to go.

Lol, yeah I guess my other half is quite small. She's about 5'8" but she's pretty petite. Just think what the G3 looks like:)

mrbass

  • ***
  • 124
    • View Profile
Grabber Neck Plate
« Reply #12 on: July 18, 2008, 01:07:12 PM »
Quote from: anyfour
That LP looks monsterous on her! :-)


Yeah, don't get her a thunderbird!

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!