Vintage Guitar and Bass forum

Warwick's EB-2

Warwick's EB-2
« on: June 16, 2008, 08:53:11 AM »
I went to the London Music Show on Saturday but there were no Gibsons!  :roll:  It seems since Rosetti are no longer the UK distributor Gibson have wittled down the number of UK dealers and they obviously thought they didn't need to attend the UK's largest trade show............

However all was not lost as I got to try out a Hofner (a first for me), Marshall's VBA bass head (which is awesome) and the Hartke HA3500 (which I liked) but the star of the show for me had to be the Warwick Starbass http://www.warwickbass.com/basses/Star%20Bass%20II.html

Quite a pricy bass (at RRP of £1700) but the build quality and feel is awesome. It has a good range of tones and I think it's a nice modern version of an EB-2. It's not as beefy or muddy sounding as the old EB basses but is a superb contender soundwise to say the Les Paul Standard or SG Reissue. Has anyone else tried one?

G

www.motherlodeonline.co.uk

jules

  • *****
  • 3068
    • View Profile
warwick
« Reply #1 on: June 16, 2008, 01:40:33 PM »
Thats a really nice looking bass. Did it come in other finishes? It does look good like that though.

Surprised there were no Gibsons there... no Epiphones either?

Warwick's EB-2
« Reply #2 on: June 16, 2008, 02:28:06 PM »
I heard that Gibson have given the hatchet to all European distributors and are now planning do it themselves which will mean lower prices and hopefully more product prevalence as that was less then great at least with the German distributor who seemed to concentrate on Epis.

That Warwick Star Bass II is nice, I played one at the fair, but unplugged. It felt good. Neck is not set, but bolt-on, but hidden in a way it appears as set.

Uwe

Warwick's EB-2
« Reply #3 on: June 16, 2008, 05:03:48 PM »
It seems to come in two finishes, one clear laquered and the other a satin finish but the same colour woods for both finishes.

They did a good job on the neck joint as it fooled me although I do remember looking at the neck joint twice but just thought it was set. Did you go to the Frankfurt show Uwe?

With regard to the dealers in the UK they are expected by Gibson to carry "the full range" so I heard.

G

www.motherlodeonline.co.uk

Warwick's EB-2
« Reply #4 on: June 16, 2008, 07:03:06 PM »
Both basses then?

santi

  • ***
  • 133
    • View Profile
Warwick's EB-2
« Reply #5 on: June 16, 2008, 09:18:28 PM »
The body silhouette is like the Aria TAB60.

I wish to ear these pickups.

Nice bass.

eb2

  • ****
  • 456
    • View Profile
Warwick's EB-2
« Reply #6 on: June 17, 2008, 04:53:06 AM »
It looks like a fairly nice take on the EB2, maybe even a tinge of Starfire bass as well in the finish.  Odd that they say it is inspired by the Framus Star bass, which it has almost nothing in common with.  I would like a modern interpretation of the old Framus too.
boom

Warwick's EB-2
« Reply #7 on: June 17, 2008, 12:21:29 PM »
Yup, I was in Frankfurt. Those Star II basses are lovingly made. Thank God it's passive. It received a favourable review in Gitarre & Bass but then so do all Warwicks there - it helps when half the advertisements are from Warwick or show Warwick distributed products!

I feel temptation rising to get one. Help!!!

EB2
« Reply #8 on: June 19, 2008, 05:24:37 PM »
I Like that Warwick too. Warwick has a custom shop and I guess you can order that Star bass as you want it to be.


I heard rumours Warwick owns that magazine? they do a lot of ads in it, but they also do a loot of good stuff for our Dutch bass magazine. Mr. Wilfer's very nice and he supports us very well. And he knows we just test and review the things we like!

Warwick's EB-2
« Reply #9 on: June 25, 2008, 05:45:15 PM »
According to Warwick, the bass has a set neck, Uwe.

Warwick's EB-2
« Reply #10 on: June 25, 2008, 05:57:18 PM »
Yes, and they're right. I just noticed yesterday that I confused the Star Bass II's set neck with the "hidden bolt on"-concept of the new Duesenbergs. My bad, sorry, Herr Wilfer.  :oops:

I might get one of those Star Basses in a fretless version ... I feel GAS acoming ...

Warwick's EB-2
« Reply #11 on: June 25, 2008, 08:23:34 PM »
A set neck!, that's a relief. I was racking my brains as to how they had disguised the neck bolts  :?

I'd like one but I think I'd be forced to sell one or two of my Gibsons at that price and I'm not prepared to do that.

G

www.motherlodeonline.co.uk

santi

  • ***
  • 133
    • View Profile
Warwick's EB-2
« Reply #12 on: June 25, 2008, 09:15:03 PM »

Warwick's EB-2
« Reply #13 on: June 25, 2008, 09:36:44 PM »
I'll give you the E-mail-address of the Custom Shop guy, Uwe!

I like the new Duesenbergs! The pick ups remind me of  split versions of TV Joneses.

Warwick's EB-2
« Reply #14 on: June 26, 2008, 10:36:58 AM »
Duesenberg hides those screws with their hidden bolt on concept (unfortunately no pictures on their site of it although it is mentioned with the new D-Basses: http://www.duesenberg.de/ ). My guess is access from the neck pup cavity and screws srewed from the body to the neck.

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!