Vintage Guitar and Bass forum

modded EB 0

modded EB 0
« on: May 01, 2008, 08:08:39 AM »
thought you guys might be interested in seeing this 61 EB O that i picked up from ebay some months ago.
i had it in mind that i wanted to modify it, so i was on the look out for a damaged one . this one has had a broken headstock that has been repaired in the past , ..it is solid and dosn't effect the playability of the bass ... so i got it at a good price,  and didn't have any guilty feelings about modding it .
here it is as it appeared on the ebay ad.


the bass was filthy ,and very funky , must have done thousands of gigs , ...just the sort of vibe i like in a bass .. :)
...so , i added a bridge  pickup , a Delano humbucker , SBCHE , ...sounds great , very punchy , and  combined with front p u , cleans up the mud .
....i have the controls as volume for each p u , so i can blend them ,...no tone control.,...switch added to for different configuration of Delano p u.
...i could not get the action comfortable with that old  original bridge ,  so added a Schaller 460 , ...which i modded the string  saddles , enabling me to get the action nice and low ,....and properly intonated as well  :!:
..now it is my main gigging bass , i love it ....very funky , versatile  sounds , plays great , ... wonderful little bass  :D




... i compared it next to my 69 eb3 , and re issue eb3, ...and this bass is my fave ,....  i love it .

dexter

jules

  • *****
  • 3068
    • View Profile
Early EB0s
« Reply #1 on: May 01, 2008, 02:38:33 PM »
yeah, I love those early EB0s... my '62 and early 63 both have that fat neck that went about 64.

Lovely old basses... I bet you'll get a fair bit for the parts you have left over too. How do you have it set normally? both pups on full, or mainly one with a little of the other dialed in?


Jules

modded EB 0
« Reply #2 on: May 02, 2008, 02:50:20 AM »
Jules , i have the rear pickup up near full ,and add a bit of the front to fatten the sound up, usually around 4-5 ,...the front p u has much more gain on its own than the rear. The  original bridge and posts can be easily put back on the bass if i wanted to, as no permanent changes have been done there, ...so i may hang on to them , or sell them .
yes, the necks on these early ones is a lot chunkier than the late 60's versions,
...the neck on this bass is rather slimmer than my 63 EBO,  ...it has no varnish left on the back of the neck , ..  it doesn't look like its been sanded ,just worn away....  it feels very nice to play on, ...really smooth.

dexter

mrbass

  • ***
  • 124
    • View Profile
mod eb0
« Reply #3 on: May 02, 2008, 02:48:45 PM »
i'm surprised you thought that bad enough to mod. Is the headstock repair ugly? The finish looks nice enough, and it is complete. Will you refin it, or did you want an original cherry?

ricky

modded EB 0
« Reply #4 on: May 03, 2008, 09:05:29 AM »
ricky, ... the headstock repair is obvious,and not really that well done, and is the reason the bass sold for about half the price as a non broken one.... , it dosn't effect the way it plays ,and  it is solid . The frets on the bass are very badly worn in some spots , and it will need refretting some time soon.When i have it in getting that done ,i will have the repair redone,so that is less obvious.I really like the bass as it is , so see no need to refinish it.
the patina that it has from all the use it has had is one of the reasons it appeals to me and adds to its charm.
... i have a really clean 63EBO, totally original, very little wear,it is a lovely  bass, ...but i actually prefer playing  this , it  plays and sounds a lot better, plus i don't have to worry if it gets any wear marks, ...its a cool bass.

dexter

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!