Vintage Guitar and Bass forum

Blueshawk Bass

Blueshawk Bass
« on: April 21, 2008, 08:43:54 PM »
Well after a lot of soul searching I decided to build a Blueshawk Gibson bass using Jules Ripper carcus's neck.



I ended up having to cut the neck off the body and removing the wood around it-nothing it. I tried heating it, steaming, dripping water into he joint and pulling & prying trying to loosen it- nothing!

I found out the reason why-they used metal pins or nails to hold the neck in!


Blueshawk Bass
« Reply #1 on: April 21, 2008, 08:45:33 PM »
I purchased blueprints which help a great deal



 Chambered Poplar body routed

Blueshawk Bass
« Reply #2 on: April 21, 2008, 08:46:07 PM »
Top F holes roughed in


Blueshawk Bass
« Reply #3 on: April 21, 2008, 08:50:39 PM »
I am planning on transparent blue dye like this with natural maple binding


Blueshawk Bass
« Reply #4 on: April 21, 2008, 08:52:57 PM »
I bought three g-3 pickups and like the blueshawk guitar, I am going to make one a noise canceling dummy pickup by demagnetizing the pickup and  the other two will have reverse poles.

Dummy coil access from the back




I bought another Big D varitone as well.

The Kahler will make a nice counter weight yes?

Blueshawk Bass
« Reply #5 on: April 21, 2008, 09:01:14 PM »
Using the blueprints, I made cream plastic pickup rings that have a similar look to the P-90 covers used.

scanned pickup & cover

 
Original

Blueshawk Bass
« Reply #6 on: April 21, 2008, 09:04:07 PM »
Next I am going to glue the top on, then route the rest of the cavities.

I drilled holes in the top & body so when I glue them they will align.

Blueshawk Bass
« Reply #7 on: April 21, 2008, 09:35:56 PM »
Looks like you are off to a great start. Cant wait to see the finished product! I must admit my heart sank a bit hearing you had to cut the ripper body off. But what an interesting find to see metal pins in there. Everything looks great so far!

Keep posting your progress!

Blueshawk Bass
« Reply #8 on: April 21, 2008, 09:55:56 PM »
Thanks.

The problem with the Ripper is, there was not a lot I could do with it I liked. they only seem to look good to me in Black, White & Cherry. Also the body had been routed and a few of the edges had been sanded too far down. Was not worth the money to me to restore it vs a one of a kind bass.

This bass build is much more intriguing to me.

Blueshawk Bass
« Reply #9 on: April 21, 2008, 10:04:29 PM »
Well, THAT, I can surely understand. THe white Grabber I have in progress was very near "too far gone". This will definitly be an interesting build for all of us to watch.

You got your grabber pickups from greatdealz on ebay, right? If I may ask, what color are your wires oon the pickups. I got 3 from them, and one has different color wires than the other 2 and the pickup is far and away more powerful than the other 2. I am thinking they have some non G-3 pickups that look like G-3 and they are selling them as such.

Blueshawk Bass
« Reply #10 on: April 21, 2008, 10:15:19 PM »
I bought three G-3/ Marauder / Bill Lawrence clear pickups that all have red & white wires. I have no way to test the output

Blueshawk Bass
« Reply #11 on: April 23, 2008, 08:50:00 AM »
That's going to be an awesome bass John. I really like the look of what you're planning.

You said you got a Big D Varitone switch, was that one of the original ones or a newer one with the big orange drop caps? I received one that I brought recently (after we spoke about them in London) and because of the size of the caps it's too deep to fit inside the cavity on my EB-3 that I brought it for.  :(

G

www.motherlodeonline.co.uk

Blueshawk Bass
« Reply #12 on: April 23, 2008, 12:55:11 PM »
Quote from: RUMBLEKAT
That's going to be an awesome bass John. I really like the look of what you're planning.

You said you got a Big D Varitone switch, was that one of the original ones or a newer one with the big orange drop caps? I received one that I brought recently (after we spoke about them in London) and because of the size of the caps it's too deep to fit inside the cavity on my EB-3 that I brought it for.  :(

G

www.motherlodeonline.co.uk


Thanks

I got one of they new ones as well, but it was equally large as the old one.

What I had to do is unwrap it and  spread out the capacitors to fit. Be careful though I broke one of the capacitor wires bending them around - an easy fix with a soldering iron though. Remember I warned you about that in London!

If you want I will post a pick of the control cavity?

I't's not pretty what I did though.

I also added a push pull single coil mode switch to my EB0. For that to fit I cleaned out a bit of wood and it presses against the control cover!

You can also use a push pull switch as a a bypass for the Varitone like on the Blueshawk. That way you can jump from capacitor mode to clean mode in a song then back again without dialing through the rotatory knob.

Blueshawk Bass
« Reply #13 on: April 23, 2008, 01:03:08 PM »
I cut out the body & routed the pickup cavities & neck pocket.



Already dinged the top and the F holes are not identical, but at least, in placed correctly.

I made the body 1/4" longer on the back to give the Kahler more room and increased the body width from 12 3/4" to 13 1/8th" to give it a bit more girth - it was the maximum width allowed by my single piece of poplar.

Blueshawk Bass
« Reply #14 on: April 23, 2008, 01:05:40 PM »
I'd forgotten that part of our conversation........Doh!

If you could post a pic of the cavity that would help as I'm not entirely sure about wiring it in and to see the caps spread out. I'd probably avoid adding anything extra like a push pull switch as I don't want to alter the original cavity in case I want to revert back to the original EB-3 wiring.

G

www.motherlodeonline.co.uk

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!