Vintage Guitar and Bass forum

a real corpse/relic from 66 (EB3)

a real corpse/relic from 66 (EB3)
« on: February 24, 2008, 11:33:08 PM »

eb2

  • ****
  • 456
    • View Profile
a real corpse/relic from 66 (EB3)
« Reply #1 on: February 25, 2008, 01:01:05 AM »
The pups and tuners are origine.  And it says two puts origine, but I think whoever was behind the mods and repair was a putz as well.  This one is a tough one to take on pretty much every aspect except the pups and tuners.  Body and neck cracks, bizzarre mods.  It is almost four bones now, but how much could it be worth?  It could be done over, but with heavy work and lots of opaque finish work.
boom

a real corpse/relic from 66 (EB3)
« Reply #2 on: February 25, 2008, 12:29:21 PM »
It reminds me of Granny Gremlin's bass where the headstock was held on with putty.

Step away from this bass

jules

  • *****
  • 3068
    • View Profile
whats it worth
« Reply #3 on: February 26, 2008, 05:33:17 AM »
So it went for $512 canadian dollars.

I guess that's about what it is worth - parts plus $100 for a body that needs major rebuilding.

Still, i'm quite sure it will be rebuilt eventually - if not by the new owner, then by the one after that - and will resurface as an immaculate white or pelham blue beauty selling for a good deal more

a real corpse/relic from 66 (EB3)
« Reply #4 on: November 10, 2010, 09:01:56 PM »
IT`S ALIVE!! Took a couple of months to:straighten neck,with block/clamp method,refret,with jumbo frets,compensating for any slight twists/bow I couldn`t straighten..Pickups work well,though I had to trace the loom from the bridge as the original was perished,and too short..bridge just too expensive to replace,so a surface mount Schaller 3-D4 C was used,well if it`s good enough for Mike Watt....custom wiring..missing 4 way rotary replaced with a volume pot,with an oversize washer and chicken head..this controls bridge volume,neck volume position now a master for both pickups...p-type ejected,and nice mahogany fillets installed...so bridge can be blended in/out of the neck pickup..other 3 pot holes dummies...white F-type...like Jack Bruce`s main Cream era EB3...Bass plays well,and is now my main instrument...used for a fair amount of live and recording work...a very tough little EB3!! Oh,and by the way,it had either spent time under water,or outside,judging by the water/swelling damage on the face of the body...worse,between the 3rd and 4th frets...a small gouge from an air rifle pellet... .22 I`d say....will be posting photos as soon as I`ve worked out how to...and sorry Jules,didn`t refinish in Pelham Blue!! :)

a real corpse/relic from 66 (EB3)
« Reply #5 on: November 10, 2010, 09:09:55 PM »
Pics or it didn't happen :-D
cheers!

a real corpse/relic from 66 (EB3)
« Reply #6 on: November 10, 2010, 09:50:50 PM »
Quick question,how do you upload pics here? Sorry,am a total Luddite....

a real corpse/relic from 66 (EB3)
« Reply #7 on: November 10, 2010, 11:12:33 PM »
You can either post a pic from your Flickr or whatever photo sharing programme you use. (it's free and simple).
Use the postcard symbol to put the URL of the pic.

Or you can use the paper clip symbol you see when you make a new post. When you click that paper clip you browse on your computer for the pics you want to post here.
cheers!

a real corpse/relic from 66 (EB3)
« Reply #8 on: November 22, 2010, 06:50:21 PM »
`66' Corpse/Relic,and Friends...... :)

a real corpse/relic from 66 (EB3)
« Reply #9 on: November 23, 2010, 12:31:49 PM »
Lots of Mojo!
cheers!

a real corpse/relic from 66 (EB3)
« Reply #10 on: November 23, 2010, 05:14:19 PM »
Nice collection. How do you like the Wal?

a real corpse/relic from 66 (EB3)
« Reply #11 on: November 23, 2010, 05:51:55 PM »
The Wal is a long time favorite,lots of Gibsonesque character,been through the wars a bit,really powerful sound,high output,very punchy..micro switch is for series/parallel..there`s actually 2 stacked coils in the pickup...2 humbuckers on top of each other!! Oh,and it`s passive....has a Hipshot detuner too...Gets used for recording now,retired from the road..and plus it`s very heavy on the shoulder!! :)

mrbass

  • ***
  • 124
    • View Profile
Wal bass
« Reply #12 on: November 25, 2010, 11:32:43 AM »
Quote from: Doug MacKinnon;14925
Gets used for recording now,retired from the road

Hey Doug,
 
is there anything we can listen to? Really interested to hear this bass
 
Ricky

a real corpse/relic from 66 (EB3)
« Reply #13 on: November 25, 2010, 06:57:33 PM »
http://www.youtube.com/watch?v=OW6a7aUMDVI
Only a rough live recording from the mid `90s,playing through 2 Trace Elliott V-Type pre amps,a stereo Drawmer LX20 compressor,a MXR graphic,into a Peavey CS800 power amp,into a Sound City 4x12,with Celestion G12s, a Hiwatt 2x15 with Gauss drivers,and an old 2x15 with Fane drivers,got a couple of Studio recordings,will try to upload..might have a go at direct dry samples if I can work out how to....(still use curly leads&valves..) If link doesn`t work, YouTube-mikeymoo 71 Channel-Mighty Hogweed-Reasons.... :)

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!