Vintage Guitar and Bass forum

EB3 string and case questions....

EB3 string and case questions....
« on: November 02, 2007, 10:39:30 PM »
Hey everyone,

some of you reading this may reccognize me from posting another topic in which I needed help identifying an EB3 that I scored (thanks Dave and Jules).

My EB3 needs a case (it didn't come in trade).  I have a gig bag but want something more sturdy to protect my baby.  Musician's Friend has two different ones but I can't tell which will fit my bass.  Suggestions?

Also, someday I will need to replace the strings.  I'd sure welcome thoughts, comments etc. especially those based on experience.  Right now my EB ("Muddy") has round wounds.  Don't know what brand.  They sound fine but I'm curious about the flat vs. round debate.

Thanks again gang!

Cheers,
JP

EB3 string and case questions....
« Reply #1 on: November 04, 2007, 04:33:04 AM »
You can get a case made for one of the SG Bass reissues---it should fit---you could get one from any Gibson dealer (and the case will say "Gibson" on the outside---a plus.
Huh?

EB3 string and case questions....
« Reply #2 on: November 04, 2007, 09:52:23 AM »
If you want a lightweight moulded case that is designed to support the EB-3's swept-back headstock, Hiscox make great cases.

EB3 string and case questions....
« Reply #3 on: November 04, 2007, 08:09:06 PM »
It really depends upon the sound you are looking for.  I had rounds on my EB-0, it sounded OK, but when I put flats on it, I thought is sounded much better.  I decided that it was best with the flats---it sounds like no other guitar that I have and it is perfect for getting a nice retro sound.  It's great for Beatles and playing 70's/late '60's rock such as Cream.  The rounds don't quite sound right.
Huh?

EB3 string and case questions....
« Reply #4 on: November 17, 2007, 12:05:36 AM »
I had an EB-3 back in '68, bought it new, best bass I ever had.  I was a fool to get rid of it.    :evil:  
That said, these basses were designed for flat wound strings.  Wound rounds came into popular use later, in the late 70's or 80's.  Regardless which you choose for your sound today, get short scale strings, NOT the long scale 34" strings.  Putting too heavy a gauge or the wrong strings on the bass can crack the neck.  That is something you have to be REALLY careful with on a set neck bass like the EB-3.  I would recommend a set of Pyramid Gold strings, the same ones that come standard on Hofner and Alembic basses.  These strings are incredibly flexible, last a long time and have a fantastic bass sound. Pyramid Golds cost a bit more, but they are worth every penny.  You can find them at Elderly Instruments, pickofthericks.com or sometimes on Ebay.  Whichever, Google it and see where the best prices are.  A set of Pyramid Golds will really make your EB-3 come alive and sing.  Trust me, get them and you won't be sorry.  As to a case, try any of the large chains of music stores.  They have a number of cases for it.  You can always put a Gibson sticker on it.  8)

EB3 string and case questions....
« Reply #5 on: November 17, 2007, 02:49:22 AM »
EB3 players almost always prefer FLATS.
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

Dave W

  • ****
  • 433
    • View Profile
EB3 string and case questions....
« Reply #6 on: November 17, 2007, 03:25:35 AM »
Except for the ones who use rounds.

EB3 string and case questions....
« Reply #7 on: November 17, 2007, 04:32:27 AM »
ever try square's
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

eb2

  • ****
  • 456
    • View Profile
EB3 string and case questions....
« Reply #8 on: November 17, 2007, 07:07:18 AM »
Real men use tape wounds.
boom

EB3 string and case questions....
« Reply #9 on: November 17, 2007, 02:12:32 PM »
but not tape worms,
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

eb2

  • ****
  • 456
    • View Profile
EB3 string and case questions....
« Reply #10 on: November 19, 2007, 07:32:30 PM »
No.  Real dieters use those.
boom

doom

  • ****
  • 264
    • View Profile
EB3 string and case questions....
« Reply #11 on: November 19, 2007, 11:25:41 PM »
I like halfrounds on my EB3

EB3 string and case questions....
« Reply #12 on: November 28, 2007, 10:09:55 AM »
I've tried (unknown-brand) rounds, that were on my 70's EB-3 when I bought it. Then I've tried TI flats shorts, then Pyramid gold flats, then finally I've found my ideal tone and feeling with Labella 760 FL short scale...They are a bit strange looking as far as silk wrapping is concerned (it is red, but different from string to string, different tone of red and material..it looks like the set is custom made but it came like that out of the box).

I use Pyramids on my Triumph and I love them there...I finf Ti flats too floppy in the short scale variant...

Anyway...strings are a too subjective affair and of course your mileage may vary..

EB-3 flats
« Reply #13 on: December 05, 2007, 06:14:54 AM »
Save yer self a lot of money and get precision wound short flats from GHS, Smooth as glass. Several gauges and affordable...not to mention the strings last forever. Flat brites are ok...but I prefer the precison wounds.

Good deal....great set of stings. I use lights.

rsa

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!