Vintage Guitar and Bass forum

Gibson GSS 100: need info.

Gibson GSS 100: need info.
« on: January 18, 2010, 05:16:44 PM »
Does anyone have any info about the Gibson GSS 100 amplifier?
Would be very helpful. :)
"So long, and thanks for all the fish!"

Gibson GSS 100: need info.
« Reply #1 on: January 23, 2010, 04:42:40 PM »
Hi, I have about 19 pages of info that came with my GSS50. The origional owner must have contacted Gibson customer service with a problem. What I found interesting, is that Walter Fuller sent the cover letter. He must have been in customer service in his later years at Gibson. He invented most of the pre-humbucker pickups. The info they sent was for the GSS100, not the GSS50. I scannned the whole thing to post it, but the file size is too large to upload. Send me a PM with your email address & I'll send them off to you, maybe 3 or 4 at a time.
« Last Edit: January 23, 2010, 05:16:23 PM by George Porter »

Gibson GSS 100: need info.
« Reply #2 on: March 06, 2010, 06:07:11 PM »
Quote from: George Porter;13018
Hi, I have about 19 pages of info that came with my GSS50. The origional owner must have contacted Gibson customer service with a problem. What I found interesting, is that Walter Fuller sent the cover letter. He must have been in customer service in his later years at Gibson. He invented most of the pre-humbucker pickups. The info they sent was for the GSS100, not the GSS50. I scannned the whole thing to post it, but the file size is too large to upload. Send me a PM with your email address & I'll send them off to you, maybe 3 or 4 at a time.


I have sent you a PM........

Gibson gss100
« Reply #3 on: September 21, 2010, 11:47:11 AM »
hello,

I was wondering if you could send me that info you had on that GIBSON GSS100 amp please.

Gibson GSS 100: need info.
« Reply #4 on: September 24, 2010, 03:43:24 AM »
Hi,
 
I found the info again, I changed computers since I scanned them. Send me your email in a PM & I'll email them to you. 8)

Gibson GSS 100: need info.
« Reply #5 on: October 06, 2010, 12:23:57 AM »
Just bid on & won a second head. It looks to be cleaner than my first one. Hopefully the reverb won't be a big issue. 8)
 
Gibson-GSS100-Bass-Amp-Head-70s-Vintage
« Last Edit: October 06, 2010, 12:37:38 AM by George Porter »

Gibson GSS 100: need info.
« Reply #6 on: November 16, 2010, 04:16:31 AM »
Any chance I could get a copy of the GSS100 stuff?  It was my main amp for many gigs back in the late 60s, and I now have two heads and a set of speakers.  They don't work so well and I'd like to fix em up.

Gibson GSS 100: need info.
« Reply #7 on: November 18, 2010, 03:31:42 AM »
Quote from: jndown;14893
Any chance I could get a copy of the GSS100 stuff? It was my main amp for many gigs back in the late 60s, and I now have two heads and a set of speakers. They don't work so well and I'd like to fix em up.

Shure, just PM me with your email address & I'll send them off to you.

 

Recent posts on vintage guitar and bass

1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!
1971 Pick Epiphone catalogWhen Epiphone production moved from Kalamazoo to the Matsumoku plant in Japan, a whole new range of electric, flattop and classic acoustic guitars was launched. Between late 1970 and 1972 the new models were launched and refined. This 'folder' catalog contains various inserts released over these years detailing four electric six-strings (ET-270, ET-275, ET-278, and thinline EA-250), three bass guitars (ET-280, ET-285, and thinline EA-260), three folk/steel acoustics, four jumbo flattop acoustics, two 12-string jumbos, four classic acoustics, and a banjo.
1981 Gibson Specials Pre-Owners Manual'Gibson Specials' was part of the June 1981 pre-owners manual series, but unlike the other folders contained a mish-mash of different guitars: limited editions, test marketing and close outs. "You will find the unusual, the brand-new, and the bargain within this folder". End of line 70s guitars like the Marauder, S-1, and L-6S Custom mixed in with brand new models the The V, The Explorer and the Flying V Bass.
It was the largest folder in the series, with 24 inserts, (19 guitars and 5 basses): Guitars: 335-S Standard, Melody Maker Double, Marauder, L-6S Custom, S-1, RD Artist, Firebird, Firebird II, Flying V, Flying V-II, The V, Explorer, Explorer II, The Explorer, The "SG" Standard, Les Paul Artist, Les Paul Artisan, ES-335 Heritage, ES-175/CC Basses: Grabber, G-3, L-9S, RD Artist Bass, Flying V Bass
1970s Shaftesbury 3263 bass Rose-Morris were selling Shaftesbury-branded Rickenbacker copy instruments from the late 1960s right through the 1970s. The 3263 bass was one of the first models, (alongside the 3261 six string and 3262 twelve string) available from late 1968 until about 1974. The earliest incarnation was a set neck bass, produced very briefly in Japan. But production quickly moved to Italy. This bolt-on neck example was built by Eko, in Recanati, using the same hardware and pickups as fitted to Eko, and Vox basses built around the same time. It's certainly a fine looking bass, and not a bad player either.
1961 Hohner Zambesi This very early, and pretty rare British-built guitar is branded Hohner London. Hohner were, of course, a German company, better known for their harmonicas and accordions, but they were keenly expanding into guitars at the birth of the 1960s. This model, along with the Hohner Amazon and (particularly) the Hohner Holborn, bear some similarity with Vox guitars of the same period; furniture manufacturer Stuart Darkins constructed bodies and necks for both brands, with Fenton Weill assembling them using their hardware and pickups. These guitars do have some hardware peculiarities, and they are not the most adjustable of instruments, but they actually play very nicely, being solidly built out of some very nice woods. Check out the video on this page.