Vintage Guitar and Bass forum

New Old Stock Gibson parts

New Old Stock Gibson parts
« Reply #15 on: September 25, 2007, 06:47:58 AM »
Did you guys see this:

link

I couldn't figure out what model it was for.  Not sure if it was an RD board, but looked to have similar functions based on the markings by the trimpots.  It got BIN'd pretty quick.

Just got my first batch today - a few bridge covers, and some 6-pos rotary switches with chicken-heads.  Figured they might be fun to use in some projects - make custom varitones, or something.  The covers are definitely the real deal.  Pretty amazing - real time capsule stuff!
Regards,
Joe

New Old Stock Gibson parts
« Reply #16 on: September 25, 2007, 10:47:18 AM »
Decay time expander!

Darn the got a time traveling device

Quote
HELLO, THIS IS A PHASER/CHORUS, THEY ALSO MADE A POWER BOOSTER,AND PUT THEM IN SONEX 180's FROM THE LATE 70's EARLY 80's! THEY WERE BATTERY.

New Old Stock Gibson parts
« Reply #17 on: September 25, 2007, 01:10:46 PM »
i ordered one of the bridge covers.it is not NOS and it's GOLD.uugghhh!
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

jules

  • *****
  • 3068
    • View Profile
RD boards
« Reply #18 on: September 25, 2007, 01:22:45 PM »
watch out for RD boards - the guitar and bass boards are really very similar - with just a few subtle differences (like the length of the attached pot shafts)

I really hope one comes up too (I just need one of the pots - I bought a NOS board a few years back with one missing pot, and that is all that stands between me and a complete ebony RD artist)

I've ordered a few parts from these peope - and the first batch arrived in good time

New Old Stock Gibson parts
« Reply #19 on: September 25, 2007, 01:53:52 PM »
They can make it to the UK & Canada, but not 2 states away!

where's the head slapping emoticon?

 :roll:

eb2

  • ****
  • 456
    • View Profile
New Old Stock Gibson parts
« Reply #20 on: September 25, 2007, 03:56:37 PM »
Think positive.  And Good luck.  It really must be a fluke, or it got lost in his car on the way to the post office.

Here is a really freaky possibility for hot rodding an EB3:
Vintage-Gibson-NOS-Parts-10-Way-Switch-w-Chicken-Knob
boom

jules

  • *****
  • 3068
    • View Profile
unplated
« Reply #21 on: September 25, 2007, 06:15:49 PM »
Quote from: reaper attack
i ordered one of the bridge covers.it is not NOS and it's GOLD.uugghhh!


they are sold as unplated. The gold colour will be brass presumably - a key for the final plating.

I've ordered 5 of them - I assume getting 5 plated will not be so much more than getting one done

New Old Stock Gibson parts
« Reply #22 on: September 26, 2007, 01:37:26 PM »
They have a plating place near you?

Here they are getting fewer due to EPA standards- highly toxic places- We have one near us that has no sign and is the back of an old building up these rickety stairs.


The seller is shipping me a new guard, he said the post office he mailed that batch from , others did not get theirs either. He's using a new post office.

jules

  • *****
  • 3068
    • View Profile
plating
« Reply #23 on: September 26, 2007, 02:28:43 PM »
Quote from: Redbird
They have a plating place near you?


not 100% sure - I have heard enough people talk about getting plating done recently - whether for bike parts, or guitar parts.

I've even considered the home-plating kits you can buy. Not sure how good they are (anyone tried one?). I know you can get nickel and chrome kits

New Old Stock Gibson parts
« Reply #24 on: September 26, 2007, 02:44:51 PM »
The real plating I saw they have to clean or sandblast the part (if corroded)
Then they dip it in this noxious chemical path (this stuff really stinks/toxic) then they attach it a brass tree that is attached to a negative electric ground, then place in a sealed tank the metal/chrome/nickel is heated to melting then either a vacuum is created that he metal adheres to, due to the positive negative charges. The smell is so bad I doubt you could do it in any living space.

I doubt you can do that at home, at least "real" plating?

Dave W

  • ****
  • 433
    • View Profile
New Old Stock Gibson parts
« Reply #25 on: September 26, 2007, 07:45:12 PM »
Can't remember where I read about this company, but take a look at this: http://www.caswellplating.com/kits/index.html

The Plug N' Plate Kits would be the only affordable ones unless you were planning on doing a lot of items. At least it looks like there are videos and other product support.

New Old Stock Gibson parts
« Reply #26 on: September 26, 2007, 08:07:21 PM »
Hey Jules, I've already spoken to some platers near to us and when I get around to plating the custom parts my dad's making for my Fenderbird we could look at doing at batch of things together to help on the cost?

G

www.motherlodeonline.co.uk

New Old Stock Gibson parts
« Reply #27 on: September 26, 2007, 08:13:13 PM »
Seems like a lot of work, money & mess when instead you can pay someone $30-40 a batch of several pieces and have it done for you. Also I wonder how durable the DIY plating is?


I see to chrome plate over brass you have to plate it in three times total.

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!