Vintage Guitar and Bass forum

Anyone have/play one ? ( sonex 180 )

Anyone have/play one ? ( sonex 180 )
« on: April 08, 2007, 10:07:14 PM »
Hey all.

I was looking for, or I guess I should say my interest has been peaked
by the Gibson Sonex 180. Anyone play/have one of these ? I read all
of the info about them on the site's info page but was wondering how or if anyone rocks the in here.
 I know they were low end by gibson standards, but  how is the output ? Do the stock tuners hold up
or are they shotty like most low end or entry level guitars.  Are the customs or standards THAT much of a difference ? different pups?  

I have a '73 les paul special (50's RI ??  slab body/ p-90's/ tob burst) and a '74 sg standard (also tob burst) and was looking for
a sort of every day guitar I wouldn't be too hurt about if it were banged up.... not that the others are SUPER rare.
Not to mention it might be kind of cool to have a sort of oddball,
if that makes sense. ?

Book shows the sonex go for around 4-5 ?  Worth it or a little more ?

thanks in advance for your input
-B
- Brian

WAB74

Sonex 180 deluxe
« Reply #1 on: April 12, 2007, 02:51:57 PM »
I played a 180 deluxe (at least I think it was the deluxe) for a while, it was borrowed so I didn't have it long enough to really know the guitar, but I found it easy to play and its sound was all there. Tuners were fine, never any problems, and yes its something different, always got noticed by other guitarists. Haven't seen one for sale in Britain for ages

WAB

gibson sonex 180 deluxe
« Reply #2 on: July 23, 2007, 11:27:52 AM »
I just got one on ebay for a very reasonnable price... of course as any cheap guitar it has been resprayed and someone has done a very s***t job of it especially the laquer coats (strange).
I started stripping but could not get to the wood, reason be after researching the net, that the body is made of "resonwood" .
anybody has refinished a guitar made of resonwood and can gimme a few tips?. I intend to get it lacquered proffessionnaly .
anyway apart from that, it has a very good sustain, a good attack and is pefect for riffs and rythm guitar playing. cheap an'all, but still a gibson...phat and heavy.

Anyone have/play one ? ( sonex 180 )
« Reply #3 on: May 22, 2008, 03:50:14 PM »
Anyone with info on the 1980 model 180 Standard that has a "real" wood finish, not the solid color that is shown in any of the info that I have found.  Would really like to know if this is rare or whatever...  Please help.  Thanks.

WAB74

wood sonex
« Reply #4 on: June 06, 2008, 01:59:43 PM »
If it is wood, can it really be a sonex? I thought be definition they were all made from resonwood. What wood is it?

Gibson Sonex 180 Standard - Real Wood
« Reply #5 on: June 08, 2008, 03:10:26 AM »
My Sonex 180 Standard is made of what appears to be Mahogony,  with a light brown clear stain.  The weight is quite light in comparison to a Les paul.  The neck is a "set" neck, meaning there are no visible screws.  Also, there is no pick guard. I will take a pic and post if that is allowed. Does anyone know why this is so unique?  I have been unable to find any info on this "animal", only the solid colors.

Image of my Sonex - Real wood...
« Reply #6 on: July 02, 2008, 11:00:01 AM »

Sorry, try this link for a pic
« Reply #7 on: July 23, 2008, 11:43:57 AM »

WAB74

A wooden Sonnex
« Reply #8 on: August 07, 2008, 01:49:53 PM »
Well that is odd. Just goes to show you, anything went back then.

Gibson Sonex 180 Standard - Real Wood
« Reply #9 on: August 07, 2008, 03:42:07 PM »
This is the info I received from Vincent Wynne at Gibson USA.

"...The specs on the guitar in the photos are not consistent with any one model we have in our database.  The headstock logo matches both the GGC-700 and the Sonex 180 (1982 version).  Neither of these models were offered in a natural finish.  The Sonex 180 has a 3-piece bolt-on neck.  Yours appears to be a set neck.  The Sonex-180 used a multi-phonic body – not a mahogany slab.  This guitar appears to be a hybrid from late 1980."

So, I guess it's kinda special.  It sure plays nice, looks good and is very lightweight, but still has incredible sustain.

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!