Vintage Guitar and Bass forum

Possible Patch 2000?

Possible Patch 2000?
« on: December 27, 2014, 01:47:57 PM »
Welcome to 2015 all.  I just picked up a 1970s Swede off of eBay that was listed as a possible "Patch 2000 Prototype".  I didn't buy into it and just wanted the vintage Hagstrom.  I assumed by the 5 PIN output jack that someone monkeyed around and either tried to add midi or tried to fake a patch.  Now that I got it I'm starting to think it might have been tweaked at the factory.  The routing is clean for the ribbon cables to the neck and the stoptail bridge.  The strings are isolated by nylon saddles on the bridge and plastic in the stoptail.  The electronics are on some kind of plastic flexible homemade and traced material and separated by cardboard and cut to fit the compartment.  From what I can tell the ribbon cables match that of a real patch (six to the bridge and lots to the neck) and the amount of components is very similar.  The work is definitely old.  The fretboard was obviously removed and reglued and I can see the wiring on the overhang.  I'm trying to see if the odds are good enough that it makes sense to try to find an old Ampeg 2000 pedal.  I wish I could test it or find the schematics w/o the pedal.  I've attached some bad pics and appreciate your take or suggestion as to who i might poke for more info.  I know Hagstrom made some quick prototypes for the NAMM show way back when and am wondering if this might be one of them.  The possible date of manufacture lines up.  Thanks for looking![ATTACH=CONFIG]3112[/ATTACH][ATTACH=CONFIG]3113[/ATTACH][ATTACH=CONFIG]3114[/ATTACH][ATTACH=CONFIG]3115[/ATTACH]
« Last Edit: January 04, 2015, 01:25:51 PM by varmit »

Possible Patch 2000?
« Reply #1 on: January 01, 2015, 02:57:22 PM »
When I was researching the '74 Swede that I bought, I found the gentleman on this Facebook site very helpful.  He even contacted the grandson of Albin Hagstrom to find out exactly when my guitar was made.  I would recommend asking him to see if the factory ever built any Prototype Patch Swedes.

http://www.facebook.com/pages/Hagstrom-Vintage-Guitars/107326719331705?ref=hl

Possible Patch 2000?
« Reply #2 on: January 04, 2015, 01:17:41 PM »
Thanks so much Meatball.  I've been meaning to get some better quality pics up but the holidays are CHAOS for my family.  First world chaos to be sure.  Happy New Year to you and yours.

Possible Patch 2000?
« Reply #3 on: January 08, 2015, 01:29:10 AM »
I hope he can help you out.  Let me know how it turns out.  It is a really intriguing guitar.

Possible Patch 2000?
« Reply #4 on: January 23, 2015, 09:52:06 PM »
[ATTACH=CONFIG]3153[/ATTACH][ATTACH=CONFIG]3154[/ATTACH][ATTACH=CONFIG]3155[/ATTACH][ATTACH=CONFIG]3156[/ATTACH][ATTACH=CONFIG]3157[/ATTACH][ATTACH=CONFIG]3158[/ATTACH][ATTACH=CONFIG]3159[/ATTACH][ATTACH=CONFIG]3160[/ATTACH][ATTACH=CONFIG]3161[/ATTACH][ATTACH=CONFIG]3162[/ATTACH][ATTACH=CONFIG]3163[/ATTACH][ATTACH=CONFIG]3164[/ATTACH]
Here are some more pics…hopefully a little better.  I'm sure I'll never know if the electronics work, but I sure would like to know why someone went to such great lengths to do this.  Its easier to find a Patch guitar than it is to find the pedal assembly (and probably cheaper) and this was a tremendous amount of work for someone.  Especially since retrofitting production patch electronics wouldn't work as when it went into production they were mounted on a hard board that would not fit.
thanks all…there just isn't much info out there on vintage swedes, let alone freaky ones like this.
Peace.
« Last Edit: January 23, 2015, 10:14:10 PM by varmit »

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!