Vintage Guitar and Bass forum

Vox Phantom XII Stereo

Vox Phantom XII Stereo
« on: January 24, 2011, 08:35:03 PM »
So, here's my newly acquired Phantom XII/folly/money pit!

Current job list is:

1.  Ten new pots
2.  Complete rewire
3.  New pickguard
4.  Ten new nobs
5.  New backpad
6.  Total rebuild
7.  Check the line on the neck is OK
8.  12 new gear covers for the tuning heads
9. Put it all back together

Any of you guys have any of the parts or, most importantly, a wiring diagram??

What could possibly go wrong?!





Vox Phantom XII Stereo
« Reply #1 on: January 25, 2011, 08:03:27 AM »
Quote from: Sancho;15249
So, here's my newly acquired Phantom XII/folly/money pit!

Current job list is:

1.  Ten new pots
2.  Complete rewire
3.  New pickguard
4.  Ten new nobs
5.  New backpad
6.  Total rebuild
7.  Check the line on the neck is OK
8.  12 new gear covers for the tuning heads
9. Put it all back together

Any of you guys have any of the parts or, most importantly, a wiring diagram??

What could possibly go wrong?!

You also miss the switches ... Believe me, price you paid for this one and  price you will pay for SO MUCH missing parts will cost you (if you find them all) more than the price of an already complete one ... :frown:

Vox Phantom XII Stereo
« Reply #2 on: January 25, 2011, 08:32:25 AM »
Hi Sploshette.  What a lovely positive start to the day!  I have all the switches and have sourced the other parts so we shall have to see what happens next.  As I said in the 'Introductions' thread, I'm here to learn, have fun and revive a few old guitars, so all may not be lost :)

Vox Phantom XII Stereo
« Reply #3 on: January 25, 2011, 03:01:47 PM »
Quote from: Sancho;15254
Hi Sploshette.  What a lovely positive start to the day!  I have all the switches and have sourced the other parts so we shall have to see what happens next.  As I said in the 'Introductions' thread, I'm here to learn, have fun and revive a few old guitars, so all may not be lost :)

I didn't mean to be negative and I truly hope you will complete the guitar soon at reasonable cost. can't wait for pictures of the finished guitars here ;-)

Vox Phantom XII Stereo
« Reply #4 on: January 25, 2011, 10:33:53 PM »
No offence taken, Sploshette.

Does anyone know what the controls are supposed to do?  I get the volume and tone for each side of each pickup, but what on earth is 'reverse' and why is there a three-way switch with 'off' (I understand that), 'stereo' and 'mono'.  Is this to do with output?  If so, how are you supposed to get a stereo signal from a (factory fitted) mono jack?

jules

  • *****
  • 3068
    • View Profile
Vox project
« Reply #5 on: January 27, 2011, 09:38:58 PM »
Yeah, I was watching that on ebay... glad you're going to make it a good home
 
The thing is, you don't need it to be 100% stock immediately. Get it up and playing (without adding any extra holes) and replace the parts for correct ones as you go along.
 
I have restored numerous guitars, and in many cases I have bought basket cases with a few parts - stripped away the bits I wanted and resold what was left for only a fraction less than I paid originally.
 
If you are patient it parts can be found. But patience and ebay vigilence are a must!
 
Sorry, can't help with a wiring diagram, but please do keep us posted over the coming months/years/decades as your restoration continues.

Vox Phantom XII Stereo
« Reply #6 on: January 27, 2011, 10:44:18 PM »
Cheers Jules.  We've managed to decode the wiring from reading up on what it's supposed to do and looking at the odd google image of the rear of the scratchplate.  

We will be rebuilding it as close to stock as possible in the short term - pattern scratchplates are available and I have enough pictures to get one engraved so it matches.  It'll be a repro, but pretty much spot on so will have to do for now.  We're thinking that if we get the same spec capacitors (and make sure they're axial ceramics) we'll get the right tone.  

Pots seem to be the tricky one.  They have 'LESA' stamped on them, but there don't seem to be many (or any) of those around to the right spec.

Knobs are available from the US at $75 each.  I have two, so the plan is to take one to a precision engineer to copy.  If they're selling at $75 each, I'm thinking I'll do a big run at £15 each and start up selling Vox knobs....

What I don't get is why someone did that to it the first place.

Help with Stereo XII
« Reply #7 on: February 11, 2011, 01:38:42 AM »
Sancho, I purchased a Stereo XII recently, in almost perfect working order (one switch position on one pickup doesn't function properly). If you need any more details on guitar function, I may be able to help. Also, I may be able to help with wiring pics, if there is any confusion.

I was actually just searching for some Vox parts when I found your post, and it inspired me to join this forum. Good luck!

Vox Phantom XII Stereo
« Reply #8 on: February 11, 2011, 09:53:32 AM »
Quote from: mjohnstewart;15389
Sancho, I purchased a Stereo XII recently, in almost perfect working order (one switch position on one pickup doesn't function properly). If you need any more details on guitar function, I may be able to help. Also, I may be able to help with wiring pics, if there is any confusion.

I was actually just searching for some Vox parts when I found your post, and it inspired me to join this forum. Good luck!


Hi John, thanks for the offer.  We think we've got it cracked for now, but I may come back tail between legs soon....

What parts are you after and, if you don't mind me asking, what did you pay?

Thanks

jules

  • *****
  • 3068
    • View Profile
Wiring photo
« Reply #9 on: February 11, 2011, 01:21:49 PM »
Nice one. I don't suppose you'd upload a couple wiring images here for future reference?

Vox Phantom XII Stereo
« Reply #10 on: February 11, 2011, 04:37:12 PM »
Sancho, just let me know if you get stuck. My name is actually Mike (John is my middle name). I got a really good deal on the Stereo XII--$1300, including shipping. I'll try to upload a pic here.

Jules--As far as wiring pics--I'll upload a few when I get the energy to remove all those strings. Where's the best place to post something like that?



Vox Phantom XII Stereo
« Reply #11 on: February 11, 2011, 04:39:14 PM »
Oh, and I'm after the following, which I posted in a separate thread:

Pickguard and mount for a Vox Constellation IV bass.
 
Pickup selector switch and/or knob for an Italian made Vox Phantom IV.
 
Bridge cover for an Italian made Vox Phantom IV.
 
Vol 1 knob from EKO era.

Thanks for any help on this!

Vox Phantom XII Stereo
« Reply #12 on: February 14, 2011, 06:58:15 PM »
Mike, nice guitar and a nice price too!

You may be able to get some of those parts from Brandoni:

http://www.brandoniguitars.co.uk/

Is this the knob you're after?

Vox-Phantom-Teardrop-Volume-Control-Knob

You can also buy parts from rhoadsmusic.com but he seems to have very large dollar signs in front of his eyes....

Vox Phantom XII Stereo
« Reply #13 on: October 09, 2011, 12:09:23 AM »
All,

Just realised, as I sauntered on here to try to sell a couple of knobs, that I never updated this link.  

Well, the Phantom is up and running.  Rewiring it with no diagram was the nightmare to end all nightmares but it's done now and making weird noises once again.  

Still not 100% original and who knows if it ever will be but 100% good and looking 100% cool.  

I just grabbed a couple of snaps so you can see it.  There is still much to be done, but I'm pleased with progress so far, consider what a total basket case it was...




Vox Phantom XII Stereo
« Reply #14 on: January 12, 2012, 01:50:25 AM »
Terribly impressive to me is the unbroken yet evidently original scratchplate (pickguard)!  Phantoms and Marks are notorious for pulling away from the attaching screws, especially on either side of the neck.  Don't tighten any screws and keep it in comfortable temperatures, not too hot or cold!

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!