Vintage Guitar and Bass forum

1962 eb3 parts?

1962 eb3 parts?
« on: October 14, 2010, 02:32:09 PM »
Hi,

I have a 1962 EB3 which is missing:

1) All the pots
2) Wiring
3) Choke

Does anybody know where i can get these parts from?

Thanks

eb2

  • ****
  • 456
    • View Profile
1962 eb3 parts?
« Reply #1 on: October 15, 2010, 07:07:26 AM »
Are you asking where can you get vintage parts, or how you can get correct value parts that look right and fit right so you can get it working?  You can do either, or a combination of such parts, but there is a financial difference.  The choke set up can be difficult to do either way.
boom

jules

  • *****
  • 3068
    • View Profile
EB3 parts
« Reply #2 on: October 15, 2010, 03:49:41 PM »
EB3 parts do come up, but rarely such early ones.
 
You might as well put in any pots of equivalent value and a three way switch - just for now to get it playing, and then replace with original parts if they come up.
 
Late sixties/early seventies EB3s were made in a lot higher numbers than '62s - plus the slotted headstock models tend to get broken most easily.... so these get parted out. I've bought complete late sixties looms for $100-$150. I can't recall ever seeing anything as early as a '62 loom for sale.

1962 eb3 parts?
« Reply #3 on: October 18, 2010, 06:12:37 PM »
Hi,

Ive got it working with a 3 way switch at the mo. I need to source the choke (part# GA-90C) but im having difficulties.

Did they use the choke on the late 60's EB3?

Any ideas where I can start looking for these spares?

Thanks

1962 eb3 parts?
« Reply #4 on: October 18, 2010, 10:30:13 PM »
Hi..you could fit a pan pot instead of the old 4 way switch? I used a pot (controls the treble pickup volume) on my `65/`66 EB3...put a chicken head knob+an oversize washer..and presto...looks the part...not everyone`s cup of tea,but cheap & easy-gets-you-up-and-running for now...

eb2

  • ****
  • 456
    • View Profile
1962 eb3 parts?
« Reply #5 on: October 20, 2010, 07:14:11 PM »
The choke is a tough nut to crack.  If you hit an electronics parts place you can find a choke that may be close in value, but Gibson used to encase theirs in a shielding can.  So improvising can work, but it is work.  They used them up to the end, so if you can find a later wiring harness, you can use that.  Or you can substitute something else in there as a tonal option that works for you.  That is the rub on the choke - lots of people got rid of them and not enough people have a need for them that there is a ready source.
boom

1962 eb3 parts?
« Reply #6 on: October 25, 2010, 08:22:09 PM »
....and the problems fixing/maintaining complex wiring+hard-to-source parts on the road,if you are lucky/unlucky to do so...!!

eb2

  • ****
  • 456
    • View Profile
1962 eb3 parts?
« Reply #7 on: October 27, 2010, 02:59:15 PM »
And that too!  Sometime around 25 years ago it became difficult to get parts for these, and an awful lot of bassists found the whole choke circuit both useless from a tone standpoint, and a pain in the keyster to have to maintain as a working bassist.  Not impossible, but a pain.  But a simple toggle switch like almost every Les Paul or SG - and simplified circuit as a result - you could deal with that anywhere.
boom

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!