Vintage Guitar and Bass forum

help identifying this guitar - JSH/Gibson Marauder

help identifying this guitar - JSH/Gibson Marauder
« on: July 20, 2008, 04:29:46 PM »
Hi

I picked up this guitar about 5 years ago and was wondering if anyone could help me identify exactly what it is! I know its a gibson marauder style body but i dont know if its actually one of these or a rip off!!

I've taken it apart so i can clean it up, as it was in quite a state when i got it (well you will see that in the pictures!).

It seems to have the Bill Lawerence designed pickups sealed in clear epoxy, along with the 1975 3 way toggle switch.  While i'm pretty sure the scratch plate is a replacement.

The neck is similar to the bolt on Marauder neck but says JSH.  I've tried to find out about them, i know they distribute guitars in the UK and make accessories but i've been unable to find out if they actually made any guitars or if this is just a replacement neck. - The machine heads are pretty awful too!

... and for the record...  i certainly did not paint it like this!!!  It looks like it used to be either black or a dark wood colour underneath the red spray paint job.

and lastly.. while i was taking the scratch plate off the earth fell off and i dont know where to solder it too  :oops: along with a loose yellow wire that is soldered to the volume pot (i assume that goes to the other pot but i dont know where on it!) If anyone knows it would be greatly appreciated!!

thanks for taking the tiem to read this!  images links are below, for some reason they didnt appear when i used html.

http://i235.photobucket.com/albums/ee28 ... rnecks.jpg
http://i235.photobucket.com/albums/ee28 ... erbody.jpg
http://i235.photobucket.com/albums/ee28 ... cratch.jpg
http://i235.photobucket.com/albums/ee28 ... ickups.jpg http://i235.photobucket.com/albums/ee28 ... erpots.jpg
  -thanks, Dougie.

help identifying this guitar - JSH/Gibson Marauder
« Reply #1 on: July 20, 2008, 10:54:42 PM »
Hi - that's a nice 70s Japanese copy of a Marauder - I had one the same. JHS is distributor John Hornby Skewes, they would have imported this & sold it under their own brand. These days they use the Vintage & Encore brands in the UK, which you'll probably be familiar with!

Anyway, the Japanese ones appear under a variety of brands - yours is the first JHS I've seen, but I've seen these as Avon, Cimar, CSL plus unbranded, which mine was. I'm not sure who made these, it's possible that they were from Fujigen Gakki - some later Cimars are confirmed as being from that factory.

Anyway, here are some pics of mine:









Hopefully that last pic will help with your wiring problem, the only lead I unsoldered to remove the electronics was the earth from the bridge, which I think ran to the earth tab on the jack - the one with the plain wire.

These guitars were very, very accurate copies of the Gibson originals - mine was a great player, too, with an excellent neck & fretwork - quite typical of the better quality Japanese copies.

Jon.

help identifying this guitar - JSH/Gibson Marauder
« Reply #2 on: July 21, 2008, 10:17:05 AM »
THANKS!

that's absolutely brilliant!! Yours looks incredible!

I've never got to play mine properly as the nut had some cardboard glued under it to add height which also meant it never stayed in tune!  But i've now cleaned the neck up and it feels excellent! I'm really excited about getting this up to scratch now!

thanks again!!

 - dougie

help identifying this guitar - JSH/Gibson Marauder
« Reply #3 on: November 30, 2009, 08:20:42 PM »
Hi BASSISIN

Ive just acquired one of these, mines branded Avon.
I thought the scratchplate was a poor home made replacement but after seeing yours im not so sure.
I am remaking it though as the old one is cracked and glued back together. what I would like to know is what material yours is made from and how the edges are finished (45 deg rout or rounded) as I would like to make it as close as possible to the original.

Thanks

just as a point of interest mine had a small piece of wood between the neck and body to correct the neck angle too.

jules

  • *****
  • 3068
    • View Profile
marauder body
« Reply #4 on: December 02, 2009, 12:40:30 AM »
Hi Jon,
 
what is yours made of? Don't suppose you have a pic of the body routes?
 
I bought a Gibson Marauder body, but it just looks too similar to yours. I wonder whether I bought a copy body. It is Mahogany though, as far as I can tell.

finally some info
« Reply #5 on: November 01, 2010, 12:00:40 AM »
ive been trying very hard to find more info on this amazingly well built and good value guitar, unfortunately info is scarce.

I have however heard tell that they were made in the legendary Fuji Gen factory who as it happens were also making the Gibson marauder at the same time!

if this is true then to my mind it would make sense to make both guitars on the same production line so as to save on tooling and using up valuable production space / time to make two (nearly) identical products.
this would also go some way to explaining the build quality and the quality of the woods etc used.

I have yet to find someone with an original Gibson Marauder that i can more closely compare it with, so i'm not 100% sure about this, but i am extremely happy with my find to the point it has actually become my prefered axe.

there aint no way im parting with this baby now

if anyone can confirm my findings im sure i wont be the only grateful one on here.

Dave W

  • ****
  • 433
    • View Profile
help identifying this guitar - JSH/Gibson Marauder
« Reply #6 on: November 01, 2010, 04:01:37 AM »
Quote from: hydeaspire;14796
ive been trying very hard to find more info on this amazingly well built and good value guitar, unfortunately info is scarce.

I have however heard tell that they were made in the legendary Fuji Gen factory who as it happens were also making the Gibson marauder at the same time!

if this is true then to my mind it would make sense to make both guitars on the same production line so as to save on tooling and using up valuable production space / time to make two (nearly) identical products.
this would also go some way to explaining the build quality and the quality of the woods etc used.

I have yet to find someone with an original Gibson Marauder that i can more closely compare it with, so i'm not 100% sure about this, but i am extremely happy with my find to the point it has actually become my prefered axe.

there aint no way im parting with this baby now

if anyone can confirm my findings im sure i wont be the only grateful one on here.


That's incorrect. The Gibson Marauder was made in USA, like all Gibsons.

help identifying this guitar - JSH/Gibson Marauder
« Reply #7 on: November 28, 2010, 10:33:13 AM »
Just for info, (this is my first post on here too) Avon made quite a few copies of Gibsons more obscure output. As well as the copy of the Marauder, they also made a copy of the Gibson Grabber bass, only they fitted it with a sliding pickup.

How do I know this?

Years ago, a bass player in a band I was in had one.

It weighed an absolute ton though, all maple body, all maple neck, and with its size too.

A real back-breaker:shock:
Maker and Converter of Sollophonic Solid-Bodied Resonator Guitars

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!