Vintage Guitar and Bass forum

double neck bass and guitar?

double neck bass and guitar?
« on: September 02, 2007, 03:47:05 PM »
my son has expressed an interest in having a twin neck guitar...bass and six string guitar..been looking on ebay for a few weeks but have only found 6 and 12 strings ones or bass ones with two bass necks...can anyone suggest or recommend brands i should be looking out for..either new or vintage..i'd prefer something vintage but needs must

thank you

jules

  • *****
  • 3068
    • View Profile
Gibson EBSF-1250
« Reply #1 on: September 05, 2007, 05:29:21 AM »
If you know where to find one, and can sell your home in time to raise the cash, get an EBSF-1250

its an EB3 with fuzztone, melded to an SG standard. They only made a handful, and they rarely come up..... but you can't get many better combinations than this.

Another option might be to join to existing instruments together - like Julian Copes Beast. Its a Non rev bird attached to a non rev firebird - ok sounds costly - but if you can find one of those guitars thats been stupidly sanded, and goes up on ebay for relatively cheap....  

I'd like to join two RD artists together (guitar and bass) but it might be a shade heavy

double neck bass and guitar?
« Reply #2 on: September 05, 2007, 03:01:05 PM »
cheers, since i posted i've found one or two and am thinking about this one.

Double Neck Guitar Bass

don't suppose any of you know anything about the brand or the seller?

double neck bass and guitar?
« Reply #3 on: September 09, 2007, 04:29:09 AM »
Mosrite made a bass and six string guitar thing.
ROCK-N-ROLL PIRATE...SKATE PUNK. 72 SB450, 76 RIPPER, 77 G3 GRABBER,92 LPB-1, 75 P-BASS,78 T-40,RAT FUZZ & BAD ATTITUDE

double neck bass and guitar?
« Reply #4 on: September 10, 2007, 01:29:11 AM »
Ibanez made such a beast in the 70's, and I believe Danelectro also did at some point in time.

double neck bass and guitar?
« Reply #5 on: September 10, 2007, 11:26:34 PM »
just ordered one of these from the USA..emailed a previous buyer in germany( a pro musician) and he assured me it was a decent instrument for the money..fingers crossed he's right and it's not an expensive ornament 8)




double neck bass and guitar?
« Reply #6 on: September 29, 2007, 03:30:04 PM »
arrived this morning 8)






Double neck / triple neck
« Reply #7 on: December 23, 2009, 12:09:07 AM »
This is my first post here.  I have the Ibanez double neck (bass and guitar).  And, yes, Danelectro and Mosrite made the same double neck configurations.  Rickenbacker made a double neck (1950's?) but am not sure if it was bass and guitar or guitar and mandolin.  I saw a 4-neck monstrosity recently.  Bass, guitar, mandolin and 5-string banjo  all on one body.

I have been unable to find a double neck with bass and mandolin as I have more need for a mandolin than a guitar.

A friend who was good at building speaker cabinets and reworking guitars is building me a triple-neck in exchange for my 1960's Fender Bassman amp.  It will have a 5-string bass, a 6-string guitar, and a 10-string mandolin neck.  The 10-string mandolin neck would cover the range of the mandolin and mandola (C-G-D-A-E).  The 5-string bass will probably string with high-C, rather than low-B (E-A-D-G-C).

If my friend doesn't come through with this invention, I will probably use an Epiphone Thunderbird bass and the Epiphone mandobird mandolin I already have to glue together.  It would be a more inexpensive route.  If I am intent on a triple neck, I think Epiphone also makes a Firebird guitar.
« Last Edit: December 23, 2009, 12:13:11 AM by JakeyJake »

jules

  • *****
  • 3068
    • View Profile
Bass and mandolin
« Reply #8 on: December 23, 2009, 02:10:31 AM »
Do you know about the double neck bass/mandolin that Epiphone made for Allen Woody?
 
Theres a pic in the Fly Guitars interview with Warren Haynes - see here https://www.flyguitars.com/interviews/allenwoody2.php
 
No idea where that is now

double neck bass and guitar?
« Reply #9 on: December 25, 2009, 07:16:56 PM »
Quote from: JakeyJake;12791
This is my first post here.  I have the Ibanez double neck (bass and guitar).  And, yes, Danelectro and Mosrite made the same double neck configurations.  Rickenbacker made a double neck (1950's?) but am not sure if it was bass and guitar or guitar and mandolin.  I saw a 4-neck monstrosity recently.  Bass, guitar, mandolin and 5-string banjo  all on one body.

I have been unable to find a double neck with bass and mandolin as I have more need for a mandolin than a guitar.

A friend who was good at building speaker cabinets and reworking guitars is building me a triple-neck in exchange for my 1960's Fender Bassman amp.  It will have a 5-string bass, a 6-string guitar, and a 10-string mandolin neck.  The 10-string mandolin neck would cover the range of the mandolin and mandola (C-G-D-A-E).  The 5-string bass will probably string with high-C, rather than low-B (E-A-D-G-C).

If my friend doesn't come through with this invention, I will probably use an Epiphone Thunderbird bass and the Epiphone mandobird mandolin I already have to glue together.  It would be a more inexpensive route.  If I am intent on a triple neck, I think Epiphone also makes a Firebird guitar.


Hi. This is my Bass & Guitar. A fun thing to play - strap it on and I am Geddy Lee - I wish!!!

« Last Edit: May 16, 2010, 08:50:19 AM by Flat Eric »

How 'Bout Building One
« Reply #10 on: August 09, 2011, 04:38:47 AM »
Quote from: Flat Eric;12809
Hi. This is my Bass & Guitar. A fun thing to play - strap it on and I am Geddy Lee - I wish!!!



I don't know about you, but I am big on building stuff.  Go to Ebay.com, and search double neck bass kit.  They also have guitars, and the bass sounds great.  Also where did you get that bass.  I want that so much.  I really want one.  I am a giant Rush fan(with a small budget) and I think that bass look nice.

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!