Vintage Guitar and Bass forum

Japanese Fender PB clone bass...

Thijs

Japanese Fender PB clone bass...
« on: August 15, 2007, 11:05:42 AM »
Recently I came across a Fender PB clone, MIJ (neckplate is stamped). The owner claimed that is was an early '70. It is in a shiny condition. However, I can't find anything on the internet about the name Orfeo, related to guitars. Does anyone know anything?

The bass itself is really a good piece of work, from those Japanese people. I compared it in detail with a Fender PB USA from 1974. There are just tiny differences; the PG is a bit larger on the top of the body, the neck-hiel is a bit smaller, but the neck-pocket is on the other hand thicker, so in total it's the same again.
The neck is maple with a maple fretboard. It plays really silky. It's a A-type neck at the nuth; 1,5 inch. Very comfortable.

The PUPs sound good; just a bit too treble IMO compared to real USA's from that time (so I changed them with original one's from '75). There's lot's of sustain. The original pots are smaller and 500K instead of 250K.

The body however is made of PLY-wood instead of solid ash. I made some pic's of that. Does anyone know more about body constructions made of PLY-wood? What kind of wood is actually used? I know it is a cheap solution in those day's. It doesn't affect the sound too much IMO, though.
I read an article of someone who said that PLY-wood bodies are much more 'solid' when they enter obstructions.

The sunburst coulor is in perfect condition. The total weight is about 4 kilogram.

See the pic's:



Hombre Thijs... Tabasco!

www.treshombres.nl

Japanese Fender PB clone bass...
« Reply #1 on: September 18, 2007, 05:54:14 PM »
Hi Thijs, my first post here & I might be able to help you ID your bass.

First of all, Orfeo will be an importer's brand name - the Japanese factories in the 70s exported under many, many different names, usually chosen by the purchasers in the countries they were exported to. Even Ibanez was only ever a brand name, not a factory!

Age-wise, it's quite difficult to tell, (although some serial numbers show the date of manufacture) but I'd be inclined to say late 70s. A couple of things make me think this: early Japanese basses (and guitars) tended not to feature a position marker on the 19th fret - they would stop at the 17th. Also, the nut and tuners are the correct P-bass type - early copies often had a Gibson-style nut, with either a chrome or white plastic truss rod cover. Tuners were more usually medium-sized, with closed backs & cast, square-ish keys.

The neck plate might give a clue as to which factory built it - if it features the "Made In Japan" text stamped on the lower part of the plate, these are commonly seen on guitars from the Fujigen Gakki factory, while if it's on the upper half, Rokkoman/Maya is a possibility. If the plate also reads "Steel Adjustable Neck", then this is often seen on guitars from Matsumoku. A 6-bolt plate is connected to the Moridaira factory.

None of this is "hard" evidence - there's very little record of the 70s Japanese guitar industry, and with so many factories (the ones I mentioned are the better-known ones - there were many others) producing basically identical instruments, it can get a bit confusing!

Anyhow, hope this helps, and if it doesn't, hopefully you at least found it interesting!

Jon.

Thijs

Japanese Fender PB clone bass...
« Reply #2 on: September 19, 2007, 07:23:10 AM »
Hi Jon,

Thanks for the very interesting things you know about the J-basses!
Someone told me (on the Dutch bass forum) that this bass was at least from the second part of the '70 due to the position of the thumbrest, as Japanese manufactorys copied a 100%. The thumbrest (from FB's) moved from the G-string to the E-string about '74/'75. The also said it was a High-End Jap.
However, I made a picture of the neckplate itself. Could be a Rokkoman/Maya then...



Do you know anything about the type of wood that's been used?

I really must say, having seven basses (including original Fender PB '72, Gibsons LP Triumph '74, EB3 '74, Rick 4001 '78 ), that the sound of the (stock)Japanese PB doesn't sound as an underquality! That counts also for the great playabel slim neck.
Hombre Thijs... Tabasco!

www.treshombres.nl

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!