Vintage Guitar and Bass forum

Re my 77 Gibson RD77 Artist

Re my 77 Gibson RD77 Artist
« on: October 15, 2008, 09:52:23 PM »
Hi
I have a mint Gibson RD77 Artist which was my 'work-horse' from when I purchased it. This particular instrument was a show piece at a guitar show here in Auckland New Zealand. A friend of mine purchased it but I in turn bought it from him within a year. Throughout my playing years I have always had a small group of quality quitars each of which has to earn its keep. The RD was by far the most versatile because of the active and passive electronics, plus the long neck.
Naturally it is in the original case, Owners Manual, schematic diagram/replacement parts list and a form describing 'Gibson Fine Tune Tailpiece. I am getting a bit long in the tooth, not doing any serious gigs these days so am mildly interested in selling. Anybody have an idea where is best to get a valuation, which country may be the best? The NZ market is too small.
Any ideas would be appreciated.
Cheers

jules

  • *****
  • 3068
    • View Profile
New Zealand RD
« Reply #1 on: October 16, 2008, 04:53:41 AM »
hi, and welcome

well they are popular basses, so you will have little problem finding buyers

As for valuation, that is tricky. In the US, or even Europe where they come up regularly or semi regularly, it is fairly easy to say what they go for. Generally, in places where they are a little unusual prices are higher.

If you are in no hurry, it might be worth getting it to a vintage guitar store and letting them sell it on consignment. Of course, you can advertise it here (preferably make a new post in the for sale section, and post some images)

By the way, i'd like to see some of that original paperwork, particularly about the tailpiece - any chance of a scan?

Gibson RD77 Artist
« Reply #2 on: October 18, 2008, 04:13:34 AM »
This is a guitar, not a bass. I would be happy to scan and send the material you mention if you are still interested.

Unfortunately we do not have a vintage guitar shop in New Zealand.

Cheers

Re my 77 Gibson RD77 Artist
« Reply #3 on: October 30, 2008, 02:19:54 PM »
Hey Ted,

Do you still have the RD77 for sale?, what colour is it?

RD Artist Guitar
« Reply #4 on: October 30, 2008, 04:09:25 PM »
Greetings
I don't what the official colour is listed as, but it is the same as the 1981 RD Artist bass as illustrated top right on this page. I was intending to take a number of pics today of it actually, it has a goldish brown center and the rest is dark. It is in its stand beside me at the moment, despite it being my main 'axe' for at least twenty years (I also used a Gibson Trini Lopez custom and an Ovation Baladeer if the stage was big enough), there are no marks of any kind. I treat my instruments very carefully, always wore a belt buckle protector so no scratches on the back, there is no wear on the neck, a little aging on the pickups, nothing on the scratch plate, the rest is mint. I have a lot (possibly all) of the original papers, (swing tickets, brochure, schematic diagram of the electronics, a form stating 'Gibson Fine Tune Tailpiece (TP-6 etc) kept in the orginal case which is in very  good condition. The gilt on the catchs is a bit worn and there is just a slight bit of wear in the lining where the neck rests in a collar. I generally worked a couple of nights a week, the odd week-long booking. The neck is straight, all is well set up by a professional guitar engineer many years ago. Zell Tate used to work for both Gibson and Fender in the States and was also personal guitar engineer with a number of well known artists. When he came to Auckland NZ he was recommended to contact me as I was relatively well known and working a lot, had a lot of muso connections. It was set up then for D'Adario Lights and I stayed with those ever since.
I am a total newbie to this site, so not sure if I can provide pics to you via here. Naturally I can provide you with my email address if you want more information or some of the pics. I am a photographer so can take good quality images of all or any aspect of the guitar, case or documentation you wish.
Leave it with you
Cheers
Ted

 

Recent posts on vintage guitar and bass

1970 Rosetti Epiphone guitar catalogScan of 1970 Epiphone guitar catalogue produced by Rosetti for the UK market. Undated but most likely from mid-late 1970, this was the first UK catalogue to show the new range of Japanese (Matsumoku) Epiphone guitars. Interestingly, these pages show the Epiphone solid bodies with a single-sided Fender-style headstock layout - a feature quickly replaced with a typical two-sided Epiphone headstock almost immediately. Epiphone electric guitars: 9520, 9525; bass guitars: 9521, 9526; acoustic guitars: 6730, 6830, 6834
1971 A World of Guitars by Rosetti catalogueScan of 1971 Rosetti catalogue (UK) featuring guitars from from numerous manufacturers worldwide: guitars by Epiphone, Hagstrom, Levin, Hoyer, Egmond, Eros, Moridaira, Kiso-Suzuki, Schaller, and Tatra.
1971 Selmer guitar catalogueScan of 1971 Selmer guitar catalogue showing the range of electric and acoustic guitars distributed by the company: guitars by Gibson, Yamaha, Selmer, Hofner and Suzuki. 1960s Selmer had always placed Hofner at the front end of their catalogues, no doubt these were the better sellers - but into the 1970s Hofner were slipping somewhat and only appear at the tail end of this publication, pride of place going to Gibson, and to a lesser extent Yamaha. In fact this is the last Selmer catalogue to include the many Hofner hollow bodies (Committee, President, Senator etc) that had defined the companies output for so many years - to be replaced in the 1972 catalogue by generic solid body 'copies' of Gibson and Fender models. A number of new Gibson models are included for the first time: the SG-100 and SG-200 six string guitars and the SB-300 and SB-400 basses.
1968 Selmer guitar catalogueScan of 1968/1969 Selmer guitar catalogue (printed July 1968), showing the entire range of electric and acoustic guitars distributed by the company: guitars by Hofner, Gibson, Selmer and Giannini. Selmer were the exclusive United Kingdom distributors of Hofner and Gibson at the time, and this catalogue contains a total of 18 electric guitars, 7 bass guitars, 37 acoustics, and 2 Hawaiian guitars - all produced outside the UK and imported by Selmer, with UK prices included in guineas. This catalogue saw the (re-)introduction of the late sixties Gibson Les Paul Custom and Les Paul Standard (see page 69) and the short-lived Hofner Club 70. Other electric models include: HOFNER ELECTRICS: Committee, Verithin 66, Ambassador, President, Senator, Galaxie, HOFNER BASSES: Violin bass, Verithin bass, Senator bass, Professional bass GIBSON ELECTRICS: Barney Kessel, ES-330TD, ES-335TD, ES-345TD, ES-175D, ES-125CD, SG Standard, SG Junior, SG Special GIBSON BASSES: EB-0, EB-2, EB-3 - plus a LOT of acoustics branded Gibson, Hofner, Selmer and Giannini
1961 Hofner Colorama IHofner Colorama was the name UK distributor Selmer gave to a series of solid and semi-solid guitars built by Hofner for distribution in the UK. The construction and specifications of the guitars varied over the period of production, but by 1961 it was a totally solid, double cutaway instrument, with a set neck, translucent cherry finish, six-in-a-row headstock, and Hofner Diamond logo pickups. Available as a single or dual pickup guitar, this sngle pickup version would have been sold in mainland Europe as the Hofner 161.
1971 Commodore N25 (Matsumoku)Commodore was a brand applied to a series of guitars produced in Japan at the well-respected Matsumoku plant from the late 1960s to the mid 1970s - and sold primarily (perhaps exclusively?) in the United Kingdom. The models bearing the Commodore name were all guitars available from different distributors with different branding. Although there may have been some minor changes in appointments (specifically headstock branding) most had the same basic bodies, hardware and construction. Equivalent models to the Commodore N25 (and this is by no means an exhaustive list) include the Aria 5102T, Conrad 5102T(?), Electra 2221, Lyle 5102T, Ventura V-1001, Univox Coily - and most famously the Epiphone 5102T / Epiphone EA-250.
1960 Hofner Colorama IIThe Hofner Colorama was the name given by Selmer to a series of solid (and semi-solid) body Hofner guitars distributed in the United Kingdom between 1958 and 1965. The Colorama name actually applied to some quite different guitars over the period, but in 1960 it was a very light, semi-solid, set necked guitar with one (Colorama I) or two (Colorama II, as seen here) Toaster pickups. Although an entry-level guitar, it was very well-built, and a fine playing guitar; certainly a step up (at least in terms of craftsmanship) from many of the Colorama guitars that would follow, and a good deal of the guitars available in Britain circa 1960.
1971 Epiphone 1820 (ET-280) bassBy the end of the 1960s, a decision had been made to move Epiphone guitar production from the USA (at the Kalamazoo plant where Gibson guitars were made), to Matsumoto in Japan, creating a line of guitars and basses significantly less expensive than the USA-built models (actually less than half the price). The Matsumoku factory had been producing guitars for export for some time, but the 1820 bass (alongside a number of guitar models and the 5120 electric acoustic bass) were the first Epiphone models to be made there. These new Epiphones were based on existing Matsumoku guitars, sharing body shapes, and hardware, but the Epiphone line was somewhat upgraded, with inlaid logos and a 2x2 peghead configuration. Over the course of the 70s, the Japanese output improved dramatically, and in many ways these early 70s models are a low point for the brand. Having said this, there are a lot worse guitars out there, and as well as being historically important, the 1820 bass can certainly provide the goods when required.
1981 Gibson MarauderProduction of Bill Lawrence's Gibson Marauder began in 1974, with production peaking in 1978. But by 1980 the model was officially discontinued, though very small numbers slipped out as late as spring 1981. Over 7000 examples shipped between 1974 and 1979, and although no totals are available for 1980 and 1981, it is unlikely production reached three figures in either of these years. These final Marauders were all assembled at the Gibson Nashville plant, and had some nice features not available through the later years of production, such as a rosewood fretboard, and in this case, an opaque 'Devil Red' finish. It's a great looking and fine playing guitar!